fr 
en 
de 
es 
nl 
Distribution Capacity/Door: 150 kg
Track: 5040
Movement: Straight
Docs
Find all MANTION product lines and all the technical information on our products. If you need help, contact us.
Looking for our catalogues? Click here.
result(s)
200 & 2200 series – Capacity door 150 KG
200 & 2200 series – Capacity door 400 KG
200 & 2200 series – Capacity door 80 KG
600 series – Weight per panel: 130 Kg
Ref: 600-300-KG
Weight per panel: 130 Kg
Track: 8570
Movement: Concertina folding doors
Installation instructions
600 series – Weight per panel: 20 Kg
Installation instructions
600 series – Weight per panel: 35 Kg
Installation instructions
600 series – Weight per panel: 75 Kg
Ref: 600-150-KG
Weight per panel: 75 Kg
Track: 6255
Movement: Concertina folding doors
Installation instructions
CADETTE
Ref: CADETTE
Capacity/Door: 40 kg
Track: Galvanized Steel (2525F)/Aluminium (2526F)
Movement: Straight
For doors up to 200 Kg maxi
Ref: INOX-304L-200KG
Capacity/Door: 200 kg
Track: Stainless steel 304L (9030 X)
Movement: Straight
For doors up to 200 Kg maxi
Ref: INOX-316L-200KG
Capacity/Door: 200 kg
Track: Stainless steel 316L (9030 X)
Movement: Straight
For doors up to 400 Kg maxi
Ref: INOX-304L-400KG
Capacity/Door: 400 kg
Track: Stainless steel 304L (9040 X)
Movement: Straight
For doors up to 400 Kg maxi
Ref: INOX-316L-400KG
Capacity/Door: 400 kg
Track: Stainless steel 316L (9040 X)
Movement: Straight
For doors up to 60 Kg maxi
Ref: INOX-316L-60KG
Capacity/Door: 60 kg
Track: Stainless steel 316L (9010 X)
Movement: Straight
For doors up to 60 Kg maxi
Ref: INOX-304L-60KG
Capacity/Door: 60 kg
Track: Stainless steel 304L (9010 X)
Movement: Staight
For doors up to 600 Kg maxi
Ref: INOX-304L-600KG
Capacity/Door: 600 kg
Track: Stainless steel 304L (9050 X)
Movement: Straight
INTEC
Ref: INTEC
Capacity/Door: 80 kg
Door thickness: 8-10 mm
Track: Aluminium
Movement: Straight
Invisible door closer
MA 40A
MA 80A
MINITUB
Moventiv 80 for glass doors weighing 20 – 80 kg
Ref: MOVENTIV-60-VERRE
Capacity / Panels: Doors from 20 to 80 kg
Motor type: Linear motor
Movement : Straight motorised
See the range
Other document Moventiv 80 for wooden doors weighing 20 – 80 kg
Ref: MOVENTIV-60-BOIS
Capacity / Panels: Doors from 20 to 80 kg
Motor type: Linear motor
Movement : Straight motorised
See the rangeOPENTEC F80
Ref: OPENTEC-F80
Capacity/Door: 80 kg
Door thickness: 10-12-12.7 mm
Max opening dimensions: 9 x 3 m (6+6 panels)
Track: Aluminium
Movement: Folding
OPENTEC FMF100
Ref: OPENTEC-FMF100
Capacity/Panel: 100 kg
Panel thickness: 70 mm
Profils: 60 mm min
Max opening dimensions: 6 x 2.4 m (3+5 panels)
Track: Aluminium
Movement: Folding
OPENTEC FMF150
Ref: OPENTEC-FMF150
Capacity/Panel: 150 kg
Panel thickness: 50 to 100 mm
Profils: 120 mm min
Max opening dimensions: 16.5 x 3.5 m (7+8 panels)
Track: Aluminium
Movement: Folding
OPENTEC FW75
Ref: OPENTEC-FW75
Capacity/Panel: 75 kg
Panel thickness: 30 to 50 mm
Panel width: 400 to 1000 mm
Max opening dimensions: 12 x 4 m (6+6 panels)
Track: Aluminium
Movement: Folding
OPENTEC FWF100
Ref: OPENTEC-FWF100
Capacity/Panel: 100 kg
Panel thickness: 68 to 100 mm
Max opening dimensions: 16.5 x 3.5 m (7+8 panels)
Track: Aluminium
Movement: Folding
PICO 13-25-26
Ref: PICO-13-25-26
Tragkraft/Tür: 13 kg (PICO 13) 25 kg (PICO 25-26)
Track: PVC
Movement: Straight
PICO 60
PICOSTAR 18
Ref: PICOSTAR-18
Capacity/Door: 55 kg
Track: Aluminium
Movement: Straight
Panel thickness: 18 mm
PICOSTAR 19
Ref: PICOSTAR-19
Capacity/Door: 55 kg
Track: Aluminium
Movement: Straight
Panel thickness: 19 mm
PICOSTAR 2
Ref: PICOSTAR-2
Capacity/Door: 55 kg
Track: Aluminium
Movement: Straight
Panel thickness: 12-19 mm
ROC-DESIGN
Ref: ROC-DESIGN
Capacity/Door:
- Type A-B-D-F: 120 kg
- Type E: 100 Kg
- Type C: 80 Kg
Track: Flat track with "black" finish
Movement: Straight
Product brochures
SAF 10-80
Video SAF 120 TELESCOPIC – 2 doors
Ref: SAF-TELESCOPIC-120-2P
Capacity / Door : 120 kg
Track : Aluminium
Movement : Straight
SAF 120 TELESCOPIC – 3 doors
Ref: SAF-TELESCOPIC-120-3P
Capacity / Door : 120 Kg
Track : Aluminium
Movement : Straight
Product brochure
Installation instructions
SAF 80 TELESCOPIC – 3 doors
Ref: SAF-TELESCOPIC-80-3P
Capacity / Door : 80 kg
Track : Aluminium
Movement : Straight
SAF 81-120
SAF-200 – Premium sliding system SAF with soft-closer for doors up to 200 kg
Ref: SAF-200
Premium sliding system SAF® with soft-closer for doors up to 200 kg
Capacity total: 200 kg
See the rangeSAF-FOLD for wooden doors up to 80 kg
Ref: SAF-FOLD
Capacity of the 2 panels: 80 kg
Track: Anodised aluminium
Movement : Folding sliding
SAF-INSIDE Motorized set for single leaf glass door
Ref: SAF-INSIDE-SIMPLE-MOTORISEE-VERRE
Capacity/Door: 80 kg
Door thickness: 8 mm
Track: Aluminium
Movement: Straight
SAF-INSIDE Motorized set for single leaf wooden door
Ref: SAF-INSIDE-SIMPLE-MOTORISEE-BOIS
Capacity/Door: 80 kg
Track: Aluminium
Movement: Straight
SAF-INSIDE Set for double leaves wooden door
Ref: SAF-INSIDE-DOUBLE-MANUEL-BOIS
Capacity/Door: 80 kg
Track: Aluminium
Movement: Straight
SAF-INSIDE Set for single leaf wooden door
Ref: SAF-INSIDE-SIMPLE-MANUEL-BOIS
Capacity/Door: 80 kg
Track: Aluminium
Movement: Straight
SAF-SLIM
Product brochure
Installation instructions
SAF-WOOD – Premium sliding system SAF with wooden pelmet
Ref: SAF-BOIS
Premium sliding system SAF® with wooden pelmet
Capacity total: 60 kg
Panel thickness: 24 - 40 mm
SAFGLASS PINCE 120
Ref: SAFGLASS-PINCE-120
Capacity/Door: 120 kg
Door thickness: 12 - 15 mm
Track: Aluminium
Movement: Straight
SAFGLASS PINCE 80
Ref: SAFGLASS-PINCE-80
Capacity/Door: 80 kg
Door thickness: 8 - 10 - 12 mm
Track: Aluminium
Movement: Straight
SAFGLASS POWER
Ref: SAFGLASS-POWER
Capacity/Door: 80 or 2x50 kg
Door thickness: 8-10-12 mm
Track: Aluminium
Movement: Straight
Product brochure
Installation instructions
SAFGLASS-INSIDE Set for double leaves glass door
Ref: SAF-INSIDE-DOUBLE-MANUEL-VERRE
Capacity/Door: 80 kg
Door thickness: 8 mm
Track: Aluminium
Movement: Straight
SAFGLASS-INSIDE Set for single leaf glass door
Ref: SAF-INSIDE-SIMPLE-MANUEL-VERRE
Capacity/Door: 80 kg
Door thickness: 8 mm
Track: Aluminium
Movement: Straight
Shutters stays 1300
Ref: ACCESSOIRES-VOLETS-2
See the range
Sliding system for shutters WIN-SLIDE 2
Ref: WIN-SLIDE-2
Capacity per panel: 80 kg
Panel thickness: 25-40 mm (up to 80 mm (1 channel) for a "shade screen" type mounting)
Panel types: Wood, Aluminium, PVC,etc.
Track: Anodised aluminium
Movement: Straight
See the range
SOFTCLOSE
Steel cantilever gate – PAF version
Ref: PAF-ACIER-PAF
Capacity: maximum opening of up to 10.5 m
Track: Steel
Movement: Straight
Hangers recommended for motorised version
Our SLIDSFOFT online configurator will guide you in sizing your gate and the concrete elements as well as in choosing the right track and hangers. It offers a design that makes the structure lightweight and strong.
See the rangeSteel cantilever gate – S version
Ref: PAF-ACIER-S
Capacity: maximum opening of up to 10.5 m
Track: Steel
Movement: Straight
Our SLIDSFOFT online configurator will guide you in sizing your gate and the concrete elements as well as in choosing the right track and hangers. It offers a design that makes the structure lightweight and strong.
SYCOMM – Motorization (WIN-SLIDE and WIN-SLIDE-R)
Ref: SYCOMM
Capacity per panel: 80 kg (1 panel), 200 kg (4 panels)
Panel thickness: 20-40 mm, 40-80 mm
Panel types: Wood, Aluminium, PVC ...
Track: Aluminium
Movement: Straight
SYCOMM SOLAR – Solar motorisation for sliding shutters
Ref: SYCOMM-SOLAR
Solar motorisation for sliding shutters for the range Win-Slide 2.
Capacity total: 200 kg
Panel thickness: 25 - 80 mm
Simple, reliable and quick to install!
- No need to connect to the mains supply
- Plug & Play : connect components using simple connectors (motor / solar panel / battery)
- Self Sufficient: Up to 30 days of autonomy without external power
- Can be integrated with standard home automation systems
- Capacity of 1 to 4 panels with total weight of 200kgs max
- Integrated brushless technology
Designed and Manufactured by Mantion!
See the rangeSystem for folding sliding shutters WIN-FOLD 2
Ref: WIN-FOLD
Capacity per panel: 20 kg
Panel thickness: 30-34 mm
Panel width: 600 mm maxi
Track: Aluminium
Movement: Straight folding
System for motorizing swinging shutters WIBAT
Ref: WIBAT
Capacity per panel: 50 kg & 1,6 m² max. / 30 cm min. & 80 cm max.
Motor type: Motorized hinge pin
Supply voltage : 24 V DC
Installation: New / renovation
Movement: Swinging
System for motorizing swinging shutters WIBAT LINTEAU
Ref: WIBAT-LINTEAU
Capacity per panel: 50 kg & 1,6 m² max. / 40 cm min. & 80 cm max.
Motor type: Motorized arm
Supply voltage : 230VAC
Installation: New / renovation
Movement: Swinging
System for motorizing swinging shutters WIBAT-APPLIQUE
Ref: WIBAT-APPLIQUE
Capacity per panel: 50 kg & 1,6 m² max. / 40 cm min. & 80 cm max.
Motor type: Motorized arm
Supply voltage : 230V
Installation: New / renovation
Movement: Swinging
System for sliding shutters WIN-SLIDE-R: simple track or double track
Ref: WIN-SLIDE-R
Capacity per panel: 80 kg, 120 kg
Panel thickness: 20-40 mm, 40-80 mm
Panel types: Wood, Aluminium, PVC ...
Track: Aluminium
Movement: Straight
System for sliding shutters WIN-SLIDE: simple track
Ref: WIN-SLIDE
Capacity per panel: 80 kg
Panel thickness: 20-40 mm
Panel types: Wood, Aluminium, PVC ...
Track: Aluminium
Movement: Straight
TANGO – Sliding-Folding system TANGO for partition doors and wardrobe doors
Ref: TANGO
Sliding-Folding system TANGO for partition doors and wardrobe doors.
Capacity/Pannel: 40 kg
Track: Aluminium (SAF)
Movement: Folding/Sliding
Thickness / Panel : 16 - 40 mm
TUBEL
Ref: TUBEL
Capacity/door: 30 kg (edge-mounted) and 40 kg (face-mounted)
Track: Aluminium
Movement: Straight
Product brochure
Installation instructions
WIDOOR
Ref: WIDOOR
Capacity/Pannel: 80 kg or 2x50 kg
Track: Aluminium
Movement: Straight motorized
Product brochure
Installation instructions
Technical drawings
Technical drawings
“Invisible” flush-mounted hinge
Ref: 1540
“Invisible” flush-mounted hinge. The hinge is concealed inside the panel and is flush with the surface.
Advantages:
- 3D adjustment: depth (X): ± 2 mm / vertical (Z): ± 2.5 mm / horizontal (Y): ±1 mm
- Reversible hinge
- Width 23 mm
220V/24V DC 100W power supply
Ref: C0000265
220 V/24 V DC 100W power supply for one opening. Length = 70 mm. Depth = 63 mm. Height = 88 mm.
View product220V/24V DC 240W power supply
Ref: C0000275
220 V/24 V DC 240W power supply for 2 to 5 openings. Length = 63.5 mm. Depth = 135 mm. Height = 140 mm.
View productAccessories
Ref: MERCURE-330
Stainless steel brush finish and anodised aluminium fore the central part.Height 330 mm Ø 30 mm
View product
Technical drawings
Accessories
Ref: MERCURE-370
Stainless steel brush finish and anodised aluminium fore the central part.Height 370 mm Ø 30 mm
View product
Technical drawings
Adhesive seal – 3 m
Adhesive sealing brush grey – 2.15 m
Adjsutable guide
Technical drawings
Adjsutable guide
Technical drawings
Adjustable angle plate
Technical drawings
Adjustable angle plate
Technical drawings
Adjustable apron set
Technical drawings
Adjustable guide
Technical drawings
Adjustable guide
Ref: 1052
- Adjustable upper guide mounted on roller cages, for bottom sliding door - sealing type Height of the olive = 30 mm
Technical drawings
Adjustable guide
Technical drawings
Adjustable guide
Ref: 1052L
- Long adjustable upper guide mounted on roller cages, for bottom sliding door - sealing type Height of the olive = 65 mm
Technical drawings
Adjustable guide
Technical drawings
Adjustable guide
Ref: 1053L
- Long adjustable upper guide mounted on roller cages, for bottom sliding door - screwing type Height of the olive = 65 mm
Technical drawings
Adjustable guide
Technical drawings
Adjustable hinge
Technical drawings
Adjustable hinge
Technical drawings
Adjustable pulley
Ref: 4145F
Adjustable pulley with cast iron wheel. Ø ext. 145 mm - groove Ø 120 mm for cables of Ø max. 6 mm.
View product
Technical drawings
Adjustable shoe-guide
Technical drawings
Adjustable shoe-guide
Technical drawings
Adjustable stop
Technical drawings
Adjustment kit
Technical drawings
Adjustment plate
Technical drawings
Adjustment plate
Technical drawings
Alu cap
Technical drawings
Aluminium pelmet – 1.95 m
Ref: 13011/195
Anodised aluminium pelmet to be clipped onto the track.
To be used for ceiling mounting.
Height = 64 mm - Length = 1.95 m. Includes 3 clips.
Aluminium pelmet – 1.95 m
Ref: 13041/195
Anodised aluminium pelmet to be clipped onto the track.
To be used for wall mounting.
Height = 82 mm - Length = 1.95 m. Includes 3 clips.
Aluminium pelmet – 3 m
Ref: 13041/300
Anodised aluminium pelmet to be clipped onto the track.
To be used for wall mounting.
Height = 82 mm - Length = 3 m. Includes 5 clips.
Product brochure
Installation instructions
Aluminium pelmet – 3 m
Ref: 13011/300
Anodised aluminium pelmet to be clipped onto the track.
To be used for ceiling mounting.
Height = 64 mm - Length = 3 m. Includes 5 clips.
Product brochure
Installation instructions
Aluminium pelmet – 3 m
Ref: GH10430P/3
Clip-on raw aluminium pelmet. For track 10400A. Used for wall mounting - Height = 78.5 mm - Length = 3 m. Pelmets can be painted on request in your choice of RAL colour.
View product
Technical drawings
Aluminium pelmet – 6 m
Ref: GH10430P
Clip-on raw aluminium pelmet. For track 10400A. Used for wall mounting - Height = 78.5 mm - Length = 6 m. Pelmets can be painted on request in your choice of RAL colour.
View product
Technical drawings
Aluminium pelmet – 6 m
Ref: 13011B/600
Raw finish aluminium pelmet to be clipped onto the track.
To be used for ceiling mounting.
Height = 64 mm - Length = 6 m. Without clips.
Product brochure
Installation instructions
Aluminium pelmet – 6 m
Ref: 13041/600
Anodised aluminium pelmet to be clipped onto the track.
To be used for wall mounting.
Height = 82 mm - Length = 6 m. Without clips.
Product brochure
Installation instructions
Aluminium pelmet – 6 m
Ref: 13041B/600
Raw finish aluminium pelmet to be clipped onto the track.
To be used for wall mounting.
Height = 82 mm - Length = 6 m. Without clips.
Product brochure
Installation instructions
Aluminium pelmet – 6 m
Ref: 13011/600
Anodised aluminium pelmet to be clipped onto the track.
To be used for ceiling mounting.
Height = 64 mm - Length = 6 m. Without clips.
Product brochure
Installation instructions
Aluminium track – 2 m
Technical drawings
Aluminium track – 3 m
Technical drawings
Aluminium track – 3 m
Technical drawings
Aluminium track – 3 m
Ref: 13312/300
Anodised aluminium track, 39 x 28 mm cross-section, drilled every 0.30 m. Length = 3 m.
View productAluminium track – 4 m
Technical drawings
Aluminium track – 4 m
Technical drawings
Aluminium track – 5 m
Technical drawings
Aluminium track – 5 m
Technical drawings
Aluminium track – 6 m
Technical drawings
Aluminium track – 6 m
Technical drawings
Aluminium track – 6 m
Ref: 13108/600
Anodised aluminium track, 36 x 27 mm cross-section, drilled every 0.44 m. Length = 6 m.
View productAluminium track – 6 m
Ref: 13312/600
Anodised aluminium track, 39 x 28 mm cross-section, drilled every 0.30 m. Length = 6 m.
View productAluminium U-profile – 2 m
Aluminium U-profile – 3 m
Aluminium U-profile – 5 m
Aluminium U-profile – 6 m
Technical drawings
Angle
Technical drawings
Angle bracket set
Ref: GH10430B
Set of 4 anodised aluminium angle brackets for mounting tracks on walls, 10400A.
View product
Technical drawings
Angle plate
Technical drawings
Angle plate
Technical drawings
Angle plate
Technical drawings
Angle plate
Technical drawings
Angle plate
Technical drawings
Angle plate
Ref: 2528D
- Wall-fixing bracket for twinned tracks 2525 supplied with screws, nuts and washers.
Height: 34 mm - Length: 47 mm - Thickness: 30/10e
Technical drawings
Angle plate
Ref: 2529
- Reinforced angle plate for wall fixing of track (MA80A), supplied with screws, nuts and washer. Height = 23 mm - Length = 30 mm - Thickness = 30/10
Technical drawings
Angle plate
Ref: 2528
- Angle plate for wall-fixing of the track (MA40A), supplied with screws, nut and washer. Height = 17 mm - Length = 22 mm - Thickness = 18/10
Technical drawings
Angle plate
Ref: 2530
- Wall fixing bracket for twinned tracks 2525. Supplied with screws, nuts and washers.
Height: 34 mm - Length: 52 mm - Thickness: 30/10e
Technical drawings
Angle plate
Ref: 3538D
- Angle plate for wall-fixing of twinned tracks. Height = 34 mm - Length = 62 mm - Thickness = 30/10
Technical drawings
Angle plate
Ref: 11013
- Angled (sliding) bracket for wall mounting of tracks 11108 and 11312. Fastened every 0.44 m (Track 11108) and fastened every 0.30 m (Track 11312).
Technical drawings
Angle plate
Technical drawings
Angle plate
Technical drawings
Angle plate
Angle plate
Technical drawings
Angle plate
Technical drawings
Angle plates
Ref: TRD3
Angle plates to move simultaneously 3 panels on 3 parallel tracks.
Parking zone on the right.
Material: stainless steel 304L and rubber.
View product
Technical drawings
Angle plates
Ref: TRG3
Angle plates to move simultaneously 3 panels on 3 parallel tracks.
Parking zone on the left.
Material: stainless steel 304L and rubber.
View product
Technical drawings
Angle steel
Technical drawings
Angle steel
Technical drawings
Angle steel
Technical drawings
Anodised aluminium profile – 3 m
Ref: GH10430R/3
Flush-mounted anodised aluminium lower profile, for threshold. Length = 3 m.
View product
Technical drawings
Anodised aluminium profile – 6 m
Ref: GH10430R
Flush-mounted anodised aluminium lower profile, for threshold. Length = 6 m.
View product
Technical drawings
Anodised aluminium track – 1,95 m
Ref: 13108/195
Anodised aluminium track, 36 x 27 mm crosssection,
drilled every 0.44 m. Length = 2 m.
Anodised aluminium track – 3 m
Ref: 13108/300
Anodised aluminium track, 36 x 27 mm crosssection,
drilled every 0.44 m. Length = 3 m.
Anodised aluminium track – 6 m
Ref: 10400A/600
Anodised aluminium drilled track, 51.5 x 47.5 mm cross-section. Length = 6 m.
View product
Technical drawings
Anodised Profile for installation of the fixed glass panel
Ref: GB6310
- Anodised aluminium Profile for installation of the fixed glass panel. To be screwed on the track - Length = 6 m
Technical drawings
Apron set
Technical drawings
Apron set
Ref: 0051
- Adjustable apron set for panels from 40 to 50 mm thickness - Capacity : 75 kg. Top fixing, screwing type
Technical drawings
Apron set
Technical drawings
Bob hanger
Technical drawings
Bolt
Technical drawings
Bolt
Ref: 1314E
Reinforced bolt with screwing type. Length = 300 mm - Ø 14 mm - adjustable nut
View product
Technical drawings
Bolt
Technical drawings
Bolt
Technical drawings
Bolt
Ref: 1316B
- Bolt with PORTE CADENAS, BOITIER EN FONTE, Cane and keeper in steel. Weight : 660 gr. - Ø 16 mm
Technical drawings
Bolt
Ref: 1316E
- Reinforced bolt with screwing type (23 mm). Length = 500 mm - Ø 16 mm - adjustable nut
Technical drawings
Bolt
Technical drawings
Bolt lock set
Technical drawings
Bottom guide
Ref: 1100
- Bottom guide with a brass olive, with sealing type plate. For U-profile 30 x 30 mm
Technical drawings
Bottom guide
Technical drawings
Bottom guide
Technical drawings
Bottom guide
Ref: 1101
- Bottom guide with a brass olive, on a reinforced plate. Sealing type - For U-profile 30 x 30 mm
Technical drawings
Bottom guide
Ref: 1059
- Bottom guide with a nylon olive (monted on roller cages), on a reinforced plate, screwing type. For U-profile 50 x 60 mm
Technical drawings
Bottom guide
Technical drawings
Bottom guide
Technical drawings
Bottom guide
Technical drawings
Bottom guide
Technical drawings
Bottom guide
Technical drawings
Bottom guide
Technical drawings
Bottom guide
Technical drawings
Bottom guide
Technical drawings
Bottom guide
Technical drawings
Bottom guide
Technical drawings
Bottom guide
Technical drawings
Bottom guide
Ref: 1089
- Bottom guide with a brass olive (mounted on roller cages), without plate. For U-profile 30 x 30 mm
Technical drawings
Bottom guide
Ref: 1088
- Bottom guide with a nylon olive (mounted on roller cages), without plate. For U-profile 25 x 17 mm
Technical drawings
Bottom guide
Technical drawings
Bottom guide
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Ref: 2529-5
Wall angle bracket for track 2525, screws, nuts and washers. Height : 23 mm. Length : 30 mm. Thickness : 30/10. Set of five.
View product
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Ref: 2529-7
Wall angle bracket for track 2525, screws, nuts and washers. Height : 23 mm. Length : 30 mm. Thickness : 30/10. Set of seven.
View product
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Technical drawings
Bracket
Ref: 13013
Angle bracket (sliding) for fastening tracks 13312 and 13108 to the wall. Fastened every 0.44 m.
View productBracket
Ref: 66RDM-2
Wall bracket for removable tracks in a pocket door configuration. The bracket is clipped into the far end of the cassette and is screwed into the opening.
Provides easy access to components found in the track (to replace hangers, etc.).
Ideal for tracks 13108.
Bracket
Ref: 66RDP-2
Ceiling mounting bracket for removable tracks in a pocket door configuration. The bracket is clipped into the far end of the cassette and is screwed into the opening.
Provides easy access to components found in the track (to replace hangers, etc.).
Ideal for tracks 13108.
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brackets
Technical drawings
Brush
Ref: 1151AL/300
Dustproof brush with aluminium support L = 3 m - total Height 90 mm, brush 40 mm.
View product
Technical drawings
Brush seal
Technical drawings
Brush seal – 10 m
Technical drawings
Brush seal – 2.5 m
Technical drawings
Buffer
Technical drawings
Buffer
Technical drawings
Buffer
Technical drawings
Buffer damper system
Ref: M68S
Buffer damper system for softly opening and/or closing doors (over 100 mm).
The damper automatically accompanies the door to its open and/or closed position.
Suitable for doors weighing 81-120 kg. It is recommended that 2 dampers be used for doors with a width of 870 mm or more.
Cable
Technical drawings
Cam lock
Technical drawings
Cane bolt
Technical drawings
Cap
Technical drawings
Cast iron wheel
Ref: 1002F
Steel wheel Ø 82 mm for hangers ROC1F, ROC2 and SPORT 250F. Combined flat track: 50x10.
View product
Technical drawings
Cast iron wheel
Ref: 1004
Steel wheel Ø106 mm for hanger SPORT 400 mounted on needle roller bearings. Combined flat track: 50x12.
View product
Technical drawings
Cast iron wheel
Technical drawings
Catch stop
Technical drawings
Clamp covering – 12 mm
Ref: GA4121
- LONG CLAMP COVERING*(covers entire width of door) Aluminium covering for 12 mm clamp consisting of 2 clamp pelmets and 2 end pieces. Length of clamp pelmets = 1.5 m (cut to length)
Technical drawings
Clamp covering – 12 mm
Ref: GA4123
- LONG CLAMP COVERING*(covers entire width of door) Aluminium covering for 12 mm clamp consisting of 2 clamp pelmets and 2 end pieces - Length of clamp pelmets = 3 m (cut to length) * Coverings are made of anodised aluminium. They are available in raw aluminium (to be painted) or painted on request in your choice of RAL colour
Technical drawings
Clamp stop
Closer pivot kits for doors
Ref: 25312DT
180° single pivot, can be integrated into a tubular profile starting at Ø40, for leaves of 1000 x 2000 max. Delivered with an upper pivot, for doors only. Closing force: 16 N/m. Opening to the right. Door capacity: 85 kg.
View product
Technical drawings
Closer pivot kits for doors
Ref: 25312GT
180° single pivot, can be integrated into a tubular profile starting at Ø40, for leaves of 1000 x 2000 max. Delivered with an upper pivot, for doors only. Closing force: 16 N/m. Opening to the left. Door capacity: 85 kg.
View product
Technical drawings
Closer pivot kits for doors
Ref: 25322DT
180° single pivot, can be integrated into a tubular profile starting at Ø50, for 1800 x 2400 max. leaf. Delivered with an upper pivot, for doors only. Closing force: 49 N/m. Opening to the right. Door capacity: 200 kg.
View product
Technical drawings
Closer pivot kits for doors
Ref: 25322GT
180° single pivot, can be integrated into a tubular profile starting at Ø50, for 1800 x 2400 max. leaf. Delivered with an upper pivot, for doors only. Closing force: 49 N/m. Opening to the left. Door capacity: 200 kg.
View product
Technical drawings
Closer pivot kits for side gates
Ref: 25312DT52
Kit including: closer pivot 25312DT and a screw-in upper pivot. For tubular profiles starting at Ø40, for leaves of 1000 x 2000 max. Opening to the right. Gate capacity: 85 kg.
View product
Technical drawings
Closer pivot kits for side gates
Ref: 25312GT52
Kit including: closer pivot 25312DT and a screw-in upper pivot. For tubular profiles starting at Ø40, for 1000 x 2000 max. leaf. Opening to the left. Gate capacity: 85 kg
View product
Technical drawings
Closer pivot kits for side gates
Ref: 25312DT51
Kit including: closer pivot 25312DT and a weld-on upper pivot. For tubular profiles starting at Ø40, for leaves of 1000 x 2000 max. Opening to the right. Gate capacity: 85 kg.
View product
Technical drawings
Closer pivot kits for side gates
Ref: 25312GT51
Kit including: closer pivot 25312DT and a weld-on upper pivot. For tubular profiles starting at Ø40, for 1000 x 2000 max. leaf. Opening to the left. Gate capacity: 85 kg.
View product
Technical drawings
Complete gear without track for doors up to 40 kg
Ref: MA40A
Complete gear without track for 40 Kg doors comprising:
- 2 rollers MA40A and 2 plates 10036;
- 2 adjustable stops;
- 1 guide 1100;
- Spanner, screws and assembly instructions.
Complete gear without track for doors up to 80 kg
Ref: MA80A
Complete gear without track for 80 Kg doors comprising:
- 2 rollers MA80A and 2 plates 10036;
- 2 adjustable stops;
- 1 guide 1103R;
- Spanner, screws and assembly instructions.
Concealed hinge for heavy duty use
Ref: 1575
Invisible" concealed hinge. The hinge is hidden inside the panel and does not protrude from its plane. Reinforced version (for intensive consumer use).
- 3D adjustment: depth (X): ± 1 mm / vertical (Z): ± 2 mm / horizontal (Y): ± 1mm
Counterweight
Technical drawings
Counterweight
Technical drawings
Cupped finger pull
Technical drawings
Cupped finger pull
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve
Technical drawings
Curve sector
Technical drawings
Curve sector
Technical drawings
Curve sector
Technical drawings
Curve sector
Technical drawings
Damper
Ref: 66AFP3
- Damper system allowing for soft closing of doors. Thanks to a catch pin fixed on the panel, the damper automatically travels to the closed position along with the door. Packaged in PET tube.
Technical drawings
Damper closer
Ref: M67S
Buffer damper system for softly opening and/or closing doors (over 100 mm).
The damper automatically accompanies the door to its open and/or closed position. Suitable for doors weighing 61-80 kg. It is recommended that 2 dampers be used for doors with a width of 870 mm or more.
Damper closer
Ref: M66
Damper closer system for gentle closing of doors (100 mm). Damper automatically follows door to its closed position. For doors between 20 and 60 Kg.
View product
Technical drawings
Damper closer system
Ref: RD-2
Damper closer system for gentle closing or opening of doors. For doors up to 120 Kg.
View productDamper system
Ref: 66AFP20
Damper system enabling the panel to close softly.
Not compatible with hanger 0030.
View product
Technical drawings
Deflection sheave
Ref: 8145F
Deflection pulley with cast iron wheel. Ø ext. 145 mm - groove Ø 120 mm for cables of Ø max. 6 mm.
View product
Technical drawings
Dished flush pull
Ref: RD-4B
Dished flush pull, in steel, with «black» finish. Height: 200 mm - Width: 90 mm.
View productDished flush pull
Technical drawings
Dished flush pull
Technical drawings
Door aligner
Ref: 5330
Door aligner, to align the panels in the closed position. One finger to be fixed on each panel.
Packing: 2 pieces.
View product
Technical drawings
Door jamb – L = 3 m
Ref: GHPG16/3
PRM (persons with reduced mobility) door jamb with threshold seal. Length = 3 m.
View product
Technical drawings
Door jamb – L = 6 m
Ref: GHPG16
PRM (persons with reduced mobility) door jamb with threshold seal. Length = 6 m.
View product
Technical drawings
Drilling template
Ref: 1575G
Drilling template for 1540 and 1575 hinges.
Supplied with 4 interchangeable plates to machine different depths.
View productDrive + wired two-button switch kit
Ref: W0002500
Drive kit (230V power supply) with wired control, includes:
- 1 SYCOMM motor (on-board electronics); with position-holding brake
- 1 wired switch C0001050
Driving Bracket
Technical drawings
Dustproof brush
Ref: 63A5/1200
- Adhesive dustproof brush, short bristles (5 mm) - in lengths of 12 m - to put on the handle (shock absorber)
Technical drawings
Dustproof brush
Ref: 63A15/1200
- Adhesive dustproof brush, short bristles (15 mm) - in lengths of 12 m - to put on the panel for the watertightness between the 2 doors
Technical drawings
Dustproof brush
Ref: 63A20/1200
- Adhesive dustproof brush, short bristles (20 mm) - in lengths of 12 m - to put on the panel for the watertightness between the 2 doors
Technical drawings
Dustproof brush
Ref: 63A25/1200
- Adhesive dustproof brush, short bristles (20 mm) - in lengths of 12 m - to put on the panel for the watertightness between the 2 doors
Technical drawings
Dustproof brush
Technical drawings
Dustproof brush
Ref: 1151/250
- Dustproof brush for lower part with aluminium reinforcement in 2.50 m length. Height of the brush = 20 mm
Technical drawings
Dustproof brush
Ref: 1151A/300
- Dustproof brush for lower part with aluminium reinforcement - Length = 3 m
Technical drawings
Dustproof seal
Technical drawings
Dustproof seal
Technical drawings
End bottom guide
Technical drawings
End caps
Technical drawings
End caps
Technical drawings
End caps
Ref: GB5355
Stainless steel end caps for U-Profile. Suitable for references GB6330 and GB6331.
View productEnd guide
Technical drawings
End guide
Technical drawings
End guide
Technical drawings
End hanger
Technical drawings
End hanger
Technical drawings
End hanger
Technical drawings
End hanger
Technical drawings
End hanger
Technical drawings
End hanger
Technical drawings
End hanger
Technical drawings
End hanger
Technical drawings
End hanger
Technical drawings
End hanger
Technical drawings
End hanger set
Technical drawings
End hanger set
Ref: GJ10430IH
End hanger set including:
- 1 end hanger;
- 1 lower end-guide;
- 1 split hinge 1512GJSO.
Technical drawings
End holder
Technical drawings
End stop
Technical drawings
End stop
End stop
Technical drawings
End stop
Ref: 1083
- Galvanized steel end stop cylinder-shaped for double doors joining in the center.
Technical drawings
End stop
Technical drawings
End stop
Technical drawings
End stop
Technical drawings
End stop
Technical drawings
End Stopper
Technical drawings
End wheel
Technical drawings
End wheel
Technical drawings
End wheel
Technical drawings
Fastener
Technical drawings
Finger pull
Ref: 1296
- «Square» cupped finger pull in ABS, mortising type Height : 70 mm - Width : 46 mm
Technical drawings
Fitting kit with hanger type A
Ref: RD-A-B
Set for doors up to 120 Kg comprising:
- 2 rollers type "A" with "black" finish.
- 2 end stops with rubber buffer, with "black" finish.
- 2 anti disbonding systems, with "black" finish.
- 1 bottom guide in black plastic.
- Screws, spanner and mounting instructions
Fitting kit with hanger type B
Ref: RD-B-B
Set for doors up to 120 Kg comprising:
- 2 rollers type "B" with "black" finish.
- 2 end stops with rubber buffer, with "black" finish.
- 2 anti disbonding systems, with "black" finish.
- 1 bottom guide in black plastic.
- Screws, spanner and mounting instructions
Fitting kit with hanger type C
Ref: RD-C-B
Set for doors up to 120 Kg comprising:
- 2 rollers type "C" with "black" finish.
- 2 end stops with rubber buffer, with "black" finish.
- 2 anti disbonding systems, with "black" finish.
- 1 bottom guide in black plastic.
- Screws, spanner and mounting instructions
Fitting kit with hanger type D
Ref: RD-D-B
Set for doors up to 120 Kg comprising:
- 2 rollers type "D" with "black" finish.
- 2 end stops with rubber buffer, with "black" finish.
- 2 anti disbonding systems, with "black" finish.
- 1 bottom guide in black plastic.
- Screws, spanner and mounting instructions
Fitting kit with hanger type E
Ref: RD-E-B
Set for doors up to 120 Kg comprising:
- 2 rollers type "E" with "black" finish.
- 2 end stops with rubber buffer, with "black" finish.
- 2 anti disbonding systems, with "black" finish.
- 1 bottom guide in black plastic.
- Screws, spanner and mounting instructions
Fitting kit with hanger type F
Ref: RD-F-B
Set for doors up to 120 Kg comprising:
- 2 rollers type "F" with "black" finish.
- 2 end stops with rubber buffer, with "black" finish.
- 2 anti disbonding systems, with "black" finish.
- 1 bottom guide in black plastic.
- Screws, spanner and mounting instructions
Fixed Point Assembly
Fixed suspension
Ref: 9434PS
Fixed end suspension for cables 70x20 maxi - (capacity/trolley 25 kg - track 3530) ou (capacity/trolley 50 kg - track 5040).
View product
Technical drawings
Fixed suspension
Ref: 9454PS
- Fixed end suspension - (Load 50 kg - profile 6255) or (Load 50 kg - profile 8570)
Technical drawings
Fixed suspension
Ref: 9434R
Fixed end suspension for cable Ø 10 to 25 - (Capacity/trolley 15 kg - track 3530) ou (Capacity/trolley 20 kg - track 5040).
View product
Technical drawings
Fixed suspension
Ref: 9454R
- Fixed end suspension - (Load 20 kg - profile 6255) or (Load 20 kg - profile 8570)
Technical drawings
Fixing accessories
Technical drawings
Fixing accessories
Technical drawings
Fixing accessories
Technical drawings
Fixing accessories
Technical drawings
Fixing bracket
Technical drawings
Fixing bracket
Technical drawings
Fixing bracket
Technical drawings
Fixing hanger
Technical drawings
Fixing hanger
Technical drawings
Fixing kit
Ref: 66KSP
- Fixing kit for attic enables an easy horizontal fixing of the upper track. For a 17 to 59° roof pitch.
Technical drawings
Fixing kit – maximum opening of 1200 mm
Ref: RD-T12-B
Kit for maximum opening of 1200 mm, «black» finish, comprising:
- 1 flat steel track, in length of 2400 mm with «black» finish.
- 4 track brackets for wall mounting (every 0.56 m.)
- 1 damper closer system for gentle closing or opening of doors.
Technical drawings
Fixing kit – maximum opening of 950 mm
Ref: RD-T9-B
Kit for maximum opening of 950 mm, «black» finish, comprising:
- 1 flat steel track, in length of 1950 mm. 50 x 6 mm
- 4 track brackets for wall mounting (every 0.56 m.)
- 1 damper closer system for gentle closing or opening of doors
Technical drawings
Fixing plate
Technical drawings
Fixing plate
Technical drawings
Fixing plate
Technical drawings
Flush pull
Technical drawings
Flush-mounted plate
Ref: 13040
Flush-mounted plate in untreated aluminium for 28FC profile.
For wooden doors: minimum track/door reveal 7 mm.
Technical drawings
Galvanized steel U profile – 6 m
Technical drawings
Gate stop
Ref: 1303S
Tilting gate stop, adjustable cataphoresis protection, sealing type Spacing : 40-70 mm Height : 50 mm Width : 40 mm - Length : 150 mm.
View product
Technical drawings
Gate stop
Ref: 1303V
Tilting gate stop, adjustable in dichromated steel, screwing type Spacing : 40-70 mm Height : 120 mm Width : 40 mm - Length : 145 mm.
View product
Technical drawings
Gear
Ref: TANGO42A
Gear to guide 2 panels including:
- 1 SAF roller (ball bearings) with plate;
- 1 upper pivot;
- 1 lower pivot;
- 3 hinges 1504C3 (side fixing);
- Screws and mounting instructions.
Technical drawings
Gear
Ref: 5302
Gear including :
- 1 adjustable shoe;
- 1 slider;
- 2 retractable upper pivots, wall fixing;
- 1 lower pivot, wall fixing;
- 1 footstep bearing;
- 3 hinges 1504 C3;
- 1 door aligner 5330;
- 1 fitting tool and 1 spanner 8/13;
- Screws and mounting instructions.
Technical drawings
Gear
Ref: 5312
Gear for 2 panels without floor guidance, includes:
- 1 adjustable shoe;
- 1 slider;
- 2 retractable upper pivots, flush-mounted;
- 1 lower pivot, flush-mounted;
- 1 pivot bracket;
- 3 hinges 1504 C3;
- 1 door aligner 5330;
- 1 fitting tool and 1 size-13 spanner;
- screws and installation instructions.
Technical drawings
Gear
Ref: 5305
Gear including :
- 1 adjustable shoe;
- 1 slider;
- 3 retractable upper pivots, wall fixing;
- 1 lower pivot, wall fixing;
- 1 footstep bearing;
- 3 hinges 1504 C3;
- 1 guiding wheel Ø 14.5 mm;
- 1 fitting tool and 1 spanner 8/13;
- Screws and mounting instructions.
Technical drawings
Gear
Ref: 5315
Gear for 2 panels with floor guidance, includes:
- 1 adjustable shoe;
- 1 slider;
- 3 retractable upper pivots, flush-mounted;
- 1 lower pivot, flush-mounted;
- 1 pivot bracket;
- 3 hinges 1504 C3;
- 1 guiding roller, Ø 14.5 mm;
- 1 fitting tool and 1 size-13 spanner ;
- screws and installation instructions.
Technical drawings
Gear
Ref: 5040GVP-6
Gear for a door of max 150 kg and max 3 m opening, includes:
- 2 edge-mounted hangers 0255A with 2 steel rollers mounted in a roller frame;
- 2 plates for edge mounting 0056;
- 10 box brackets 5041;
- 1 joining bracket 5041MC;
- 11 screw-in angle plates 5043;
- 2 end caps 5050;
- 1 bottom guide 1092V25;
- 2 stops 2091;
- 1 handle 1298.
Assembled WITHOUT a U-profile: double olive lower guide.
Order separately: 2 tracks 5040/300.
View productGear
Ref: 9050GPAF
Special gear for 4-metre-long steel cantilever sliding gates weighing 400 kg.
Gear includes:
- 2 standard cantilever hangers 9952PAF;
- 2 end brackets 1051G;
- 2 lead-in guides 1050E;
- 2 adjustable guides 1062.
Technical drawings
Gear
Ref: CADETT
Gear including:
- 2 hangers 0222 mounted on a RILSAN ring with plates 0026 et 0021
- 2 end stops 1097
- 1 guide 1103
- 1 spanner 13, Screws and mounting instructions
Technical drawings
Gear
Ref: TUB30-1
Gear for 1 edge-mounted panel, includes:
- 2 edge-mounted hangers 0030;
- 2 end stops with panel position holding mechanism;
- 1 lower guide 1124;
- screws and installation instructions.
Technical drawings
Gear
Ref: TUB40-2
Gear for 2 face-mounted panels, includes:
- 2 face-mounted hangers 0040-A;
- 2 face-mounted hangers 0040-B, mounted on ball-bearings;
- 4 end stops with panel position holding mechanism;
- 1 lower guide 1124;
- screws and installation instructions.
Technical drawings
Gear
Ref: TUB40-3
Gear for third face-mounted panel, includes:
- 2 face-mounted hangers 0040-C;
- 1 positioner for the central panel;
- 2 end stops with panel position holding mechanism;
- 1 lower guide 1124;
- screws and installation instructions.
Used in addition to the TUB40 sets for a third panel.
View product
Technical drawings
Gear
Ref: SUPCAD
Gear including:
- 2 rollers 0224 with monobloc plates and crash-stops
- 1 guide 1103R
- Screws, spanner and mounting instructions
Technical drawings
Gear
Ref: TANGO42
Gear to guide 2 panels. Suitable for TANGO40-120 and TANGO40-150 to add 2 panels on a 4 panels installation (2+2).
View product
Technical drawings
Gear – Doors up to 300 Kg
Ref: 6255GV
Gear for doors up to 300 kg including:
- 2 hangers 0265 Side fixing equipped with 2 steel wheels mounted on roller cages
- 2 plates 0066 Top fixing
- 12 brackets 6256
- 1 jointing bracket 6256MC
- 13 angle plates 6258
- 2 ornemental caps 6265
- 2 bottom guides 1101
- 2 stops 2094
- 1 handle 1297
Technical drawings
Gear for 1 door weighing 10-80 kg
Ref: SAF10-80
Gear for 1 door weighing 10-80 kg:
- 2 hangers 13218 (mounted on ball bearings);
- 2 plates 13036;
- 2 adjustable end stops 11213;
- 1 floor guide 1103R;
- 1 Buly (bubble level).
Gear for 1 door weighing 81-120 kg
Ref: SAF81-120
Gear for 1 door weighing 81-120 kg:
- 2 hangers 13232 (mounted on ball bearings);
- 2 plates 13036;
- 2 adjustable end stops 11213;
- 1 floor guide 1103R;
- 1 Buly (bubble level).
Gear for 1 leaf – for opening of 0.73 m to 0.83 m
Ref: GB5000
Gear for 1 leaf for opening of 0.73 m to 0.83 m including:
- 1 roller kit with clamps and damper
- 2 end stops
- 2 fastening clips for pelmet
- 1 lower guide
- Installation instructions and tools
Technical drawings
Gear for 1 leaf – for opening of 0.83 m to 1.33 m
Ref: GB5001
Gear for 1 leaf for opening of 0.83 m to 1.33 m including:
- 1 roller kit with clamps and damper
- 2 end stops
- 2 fastening clips for pelmet
- 1 lower guide
- Installation instructions and tools
Technical drawings
Gear for 1 panel
Ref: PICO60
Gear includes :
- 2 rollers 0160, mounted on precision ball bearings,
- 2 upper guides 1155,
- 1 stop-holder (immobilises one panel),
- Screws and installation instructions.
Technical drawings
Gear for 2 synchronised leaves – for opening of 1.33 m to 1.53 m
Ref: GB5002
Gear for 2 synchronised leaves for opening of 1.33 m to 1.53 m including:
- 2 roller kits with clamps and dampers
- 1 cable-operated synchronisation kit
- 4 end stops
- 3 fastening clips for pelmet
- 2 lower guides and 1 translucent adhesive seal for door edge
- Installation instructions and tools
Technical drawings
Gear for 2 synchronised leaves – for opening of 1.53 m to 1.73 m
Ref: GB5003
Gear for 2 synchronised leaves - for opening of 1.53 m to 1.73 m including:
- 2 roller kits with clamps and dampers
- 1 cable-operated synchronisation kit
- 4 end stops
- 3 fastening clips for pelmet
- 2 lower guides and 1 translucent adhesive seal for door edge
- Installation instructions and tools
Technical drawings
Gear for 2 synchronised leaves – for opening of 1.73 m to 2.53 m
Ref: GB5004
Gear for 2 synchronised leaves - for opening of 1.73 m to 2.53 m including:
- 2 roller kits with clamps and dampers
- 1 cable-operated synchronisation kit
- 4 end stops
- 3 fastening clips for pelmet
- 2 lower guides and 1 translucent adhesive seal for door edge
- Installation instructions and tools
Technical drawings
Gear for doors weighing up to 80 kg
Ref: SAF82A
Gear for doors weighing up to 80 kg:
- 2 SAF hangers
- 2 hanger/door fixing plates
- 2 adjustable door stops, 11213 (closer available as an option)
- 1 guide 1103R
- 2 Allen keys, screws and dowels + installation instructions
Installation instructions
Technical drawings
Gear for double synchronised 10mm door
Ref: GA5072
Gear for two 10 mm doors including :
- 4 rollers with precision bearings and 4 aluminium clamps;
- 2 end stops 11213N;
- 2 damper closer systems M66;
- 1 cable 1.5 mm Ø 10 m long;
- 1 translucent adhesive seal to be fitted on door edge to dampen closure. L = 3 m;
- Fasteners on short clamps;
- 2 lower guides in stainless steel;
- 1 spirit level for the track adjustment;
- 4 cleaning wipes for the degreasing of the glass before clamp fitting;
- Tools and installation instructions.
Technical drawings
Gear for double synchronised 12mm door
Ref: GA5073
Gear for two 12 mm doors including :
- 4 rollers with precision bearings and 4 aluminium clamps;
- 2 end stops 11213N;
- 2 damper closer systems M66;
- 1 cable 1.5 mm Ø 10 m long;
- 1 translucent adhesive seal to be fitted on door edge to dampen closure. L = 3 m;
- Fasteners on short clamps;
- 2 lower guides in stainless steel;
- 1 spirit level for the track adjustment;
- 4 cleaning wipes for the degreasing of the glass before clamp fitting;
- Tools and installation instructions.
Technical drawings
Gear for double synchronised 8mm door
Ref: GA5071
Gear for two 8 mm doors including :
- 4 rollers with precision bearings and 4 aluminium clamps;
- 2 end stops 11213N;
- 2 damper closer systems M66;
- 1 cable 1.5 mm Ø 10 m long;
- 1 translucent adhesive seal to be fitted on door edge to dampen closure. L = 3 m;
- Fasteners on short clamps;
- 2 lower guides in stainless steel;
- 1 spirit level for the track adjustment;
- 4 cleaning wipes for the degreasing of the glass before clamp fitting;
- Tools and installation instructions.
Technical drawings
Gear for STARAL GLASS 150
Ref: GD0033
Gear for one 12 mm thick door, includes :
- 2 stainless steel rollers with precision bearings + installation template
- 2 anodised aluminium clamps
- 2 track stops
- 1 brushed stainless steel lower guide
- 1 bubble level for installing the track2 wipes to clean the glass of any grease before fixing the clamps
- Allen keys and installation instructions
Technical drawings
Gear for two doors weighing 120 kg each
Ref: SAF120-TL2
Gear for two doors weighing max. 120 kg each and an opening of max. 3 m, with screw-in, edge-mounted stainless steel plates.
View product
Technical drawings
Gear for two doors weighing 120 kg each
Ref: SAF121-TL2
Gear for two doors weighing max. 120 kg each and an opening of max. 3 m, with flush-mounted galvanised steel plates.
View product
Installation instructions
Technical drawings
Gear MINITU
Ref: MINITU
- Gear including : 2 sliders Minitub 111, 1 guide 1123, 1 finger pull 1293, Screws and mounting instructions
Technical drawings
Gear PICO 13
Ref: PICO13
- Gear including : 2 rollers 0113 mortising type, 2 guides 1113 mortising type, Screws and mounting instructions
Technical drawings
Gear PICO 25
Ref: PICO25
- Gear including : 2 rollers 0125 mortising type, 2 guides 1125 mortising type, Screws and mounting instructions
Technical drawings
Gear PICO 26
Ref: PICO26
- Gear including : 2 rollers 0126, screwing type, mounted on ball bearings, 2 guiding plates 1155, screwing type, Screws and mounting instructions
Technical drawings
Gear PICO 59
Ref: PICO59
Gear for equiping 1 panel:
- 2 rollers equipped with nylon rollers mounted on precision ball bearings
- 2 guides equipped with nylon rollers mounted on precision ball bearings
- Fixing screw and installation instructions
Technical drawings
Guide
Ref: 1099XA2
- Guide with 1 brass olive on stainless steel plate to be screwed in for 30x30 U-profile
Technical drawings
Guide
Technical drawings
Guide
Technical drawings
Guide
Ref: 1053
- Adjustable upper guide. Sealing type. For bottom sliding gate. Equipped with the 1050 guide.
Technical drawings
Guide
Ref: 1101EDG
View product
Guide
Guide
Ref: 1062
- Upper guide with 2 adjustable olives (Ø 40) for a 40 to 70 mm tube. Length : 105 mm.
Technical drawings
Guide
Guide
Ref: 1128A
- Adjustable guide with 2 nylon olives on a galvanised steel angle plate for U 25x17
Technical drawings
Guide
Ref: 1064
- Upper guide with 4 adjustable olives (Ø 40) for a 40 to 70 mm tube. Length : 245 mm.
Technical drawings
Guide
Guide
Ref: 1065
- Upper guide with 4 adjustable olives (Ø 40) for 40 to 60 mm tube. Length : 220 mm.
Technical drawings
Guide
Ref: 23050B
Guide with convex nylon olive.
A = 71 - B = 49 - C = 50 - D = 10
Guide for sliding gates.
Technical drawings
Guide
Technical drawings
Guide
Technical drawings
Guide
Technical drawings
Guide
Technical drawings
Guide
Technical drawings
Guide
Ref: 1102XA2
- Guide with 1 nylon olive on stainless steel plate to be screwed in for 25x17 U-profile
Technical drawings
Guide
Technical drawings
Guide
Technical drawings
Guide
Ref: 1050
Guide without plate mounted on needle bearing with a nylon olive. Supplying with the 1052 and 1053 guides. Ø 50 mm - Height 25 mm.
View product
Technical drawings
Guide
Ref: 1102FXA2
Stainless steel (304L) plate-mounted lower guide, to be screwed in, for track (GC6100) (OPENTEC FW75).
View product
Technical drawings
Guide
Ref: 1112/2
- Adjustable guide with 2 nylon olives on a stainless steel plate for U 25x18
Technical drawings
Guide
Technical drawings
Guide
Ref: 1131XRG
- White plastic runner on tiltable stainless steel plate for 25x17 and 30x30 U-profiles and 4-mm flat iron
Technical drawings
Guide
Ref: 1092V14
Screw-in guide, adjustable (18 to 42 mm) with two black nylon olives. Diameter = 14 mm. To be fixed on the jambs of the opening.
View product
Technical drawings
Guide
Ref: 1131DXRG
Dual white plastic runner on tiltable stainless steel plate for 25x17 and 30x30 U-profiles and 4-mm flat iron
View product
Technical drawings
Guide
Ref: 1092V25
Screw-in guide, adjustable (35 to 60 mm) with two black nylon olives. Diameter = 25 mm. To be fixed on the jambs of the opening.
View product
Technical drawings
Guide
Guide
Ref: 1180
Lower guide reinforced with a 64-mm-diameter steel roller (mounted on ball bearings), on a screw-in plate (position adjustable thanks to slotted holes) for UPE 80.
View product
Technical drawings
Guide
Ref: PEG-E
Zinc-plated single roller guide, for gates on rails on the ground. Diameter: 50 MM. To be used with the U 1115 profile.
View productGuide
Technical drawings
Guide
Technical drawings
Guide
Technical drawings
Guide
Technical drawings
Guide
Technical drawings
Guide
Technical drawings
Guide
Technical drawings
Guide
Technical drawings
Guide
Technical drawings
Guide
Ref: 4656D
Guide with safety brake, right-side version (R). Corresponding runner: 4272.
View product
Technical drawings
Guide
Technical drawings
Guide
Technical drawings
Guide
Ref: 1124
Universal adjustable lower guide (cut-to-length) in transparent polycarbonate for equipping two doors.
2 installation options:
- without grooves (1 guide on each side of the door);
- with 5 x 15 mm grooves.
Guide
Technical drawings
Guide
Technical drawings
Guide
Technical drawings
Half shoe guide
Technical drawings
Half shoe guide
Technical drawings
Half shoe guide
Technical drawings
Handle
Technical drawings
Handle
Technical drawings
Handle
Ref: 71G/280A
Set of 2 anodized aluminium“drop” handles. Suiting for panels from 12 to19 mm thickness. - 2.8 m. length. Furnished with 6 snap-on bracket (3 on each side on the panel)
View product
Technical drawings
Handle
Ref: 71G/280B
Set of 2 anodized aluminium “drop” handles with lacquered white (RAL 9016) finishing. Suiting for panels from 12 to19 mm thickness. - 2.8 m. length. Furnished with 6 snap-on bracket (3 on each side on the panel).
View product
Technical drawings
Handle
Ref: 71V/280A
Set of 2 anodized aluminium“coma” handles. Suiting for panels from 12 to19 mm thickness. - 2.8 m. length. Furnished with 6 snap-on bracket (3 on each side on the panel).
View product
Technical drawings
Handle
Ref: 71V/280B
Set of 2 anodized aluminium“coma” handles with lacquered white (RAL 9016) finishing. Suiting for panels from 12 to19 mm thickness. - 2.8 m. length. Furnished with 6 snap-on bracket (3 on each side on the panel)
View product
Technical drawings
Handle
Ref: 1295/70
Zamak double handle for 30-70 mm tubes, with adjusting screw. Square inner rod - 8 mm.
View product
Technical drawings
Handle
Technical drawings
Handle
Ref: 1295/50
Zamak double handle for 25-40 mm tubes, with adjusting screw. Square inner rod - 8 mm.
View product
Technical drawings
Handle
Technical drawings
Handle
Technical drawings
Handle
Technical drawings
Handle
Technical drawings
Handle 18mm
Technical drawings
Handle 18mm
Ref: 71E18/280B
- Lacquered white handle 18 mm (RAL 9016) - 2.8 m long - packaged in PET tube
Technical drawings
Handle 18mm
Technical drawings
Handle 18mm
Ref: 71H18/280B
- Anodised aluminium 19 mm handle lacquered white handle (RAL 9016) - 2.8 m long
Technical drawings
Handle 19mm
Technical drawings
Handle 19mm
Ref: 71E19/280B
- Anodised aluminium 19 mm handle lacquered white handle (RAL 9016) - 2.8 m long - packaged in PET tube
Technical drawings
Handle 19mm
Technical drawings
Handle 19mm
Ref: 71G19/280B
- Anodised aluminium 19 mm handle lacquered white handle (RAL 9016) - 2.8 m long - packaged in PET tube
Technical drawings
Handle 19mm
Technical drawings
Handle 19mm
Technical drawings
Handle 19mm
Technical drawings
Handle 19mm
Ref: 71V19/280B
- Anodised aluminium 19 mm handle lacquered white handle (RAL 9016) - 2.8 m long - packaged in PET tube
Technical drawings
Handle kit
Ref: VENUS-505
Kit comprising 2 handles with brushed stainless steel fastening element. Height 505 mm, Ø 25 mm.
View product
Technical drawings
Handle kit
Ref: VENUS-810
Kit comprising 2 handles with brushed stainless steel fastening element. Height 810 mm, Ø 25 mm.
View product
Technical drawings
Handle kit
Ref: VENUS-657
Kit comprising 2 handles with brushed stainless steel fastening element. Height 657 mm, Ø 25 mm.
View product
Technical drawings
Handles
Technical drawings
Handles
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 9242XSA2
- STAINLESS STEEL hanger (with stainless steel wheels mounted on ball bearings, fixing bolt Ø M 14)
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 9242NC
Roller with bracket to be screwed, fitted with 4 nylon wheels mounted on ball bearing top fixing. Capacity/door : 200 Kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9242NC2
Roller with stainless steel framing and nylon wheels mounted on ball bearing top fixing Ø M10. To be used with plates 0036 or adjustable apron 0031. Capacity/door : 200 Kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9252NC
Roller with bracket to be screwed, fitted with 4 nylon wheels mounted on ball bearing top fixing. Capacity/door : 400 Kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9252NC2
Roller with stainless steel framing and nylon wheels mounted on ball bearing top fixing Ø M12.
To be used with plates 0056 / 0055 or adjustable apron 0051. Capacity/door: 400 Kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9232NC2
Hanger with stainless steel reinforcement, equipped with 4 nylon-coated rollers mounted on ball bearings with a M8 pin diameter (plate 0036XM8).
View product
Technical drawings
Hanger
Ref: 9235XSA2
View product
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 99212XA2
STAINLESS STEEL hanger with Delrin wheels on smooth axle, fixing screw Ø M 10.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9318NLX
- Hanger mounted on ball bearings with Nylon binding, with a STAINLESS STEEL axis
Technical drawings
Hanger
Ref: 0261
- Hanger, top fixing, with wheels mounted on roller cages. Removable plate, which enables 2 different positions and an adaptation to 2 different panel thicknesses.
Technical drawings
Hanger
Ref: 0265
Hanger top fixing, with 2 steel wheels mounted on roller cages. Fixing bolt : 50 mm.
2 per pack.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 0265D
Hanger top fixing, nylon wheels with glass fiber mounted on roller cages.
2 per pack.
View product
Technical drawings
Hanger
Ref: 2262
Hanger with swanneck, 4 wheels with ball bearings, nylon tyre and glass fiber.
View product
Technical drawings
Hanger
Ref: 2265
Hanger, top fixing, 4 wheels with ball bearings, nylon tyre and glass fiber.
2 per pack.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 0255D
Hanger top fixing with fixing bolt and 2 Delrin wheels mounted on roller cages Capacity per door: 150kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 0255DL
Monture with long fixing bolt (118 mm). Capacity per door: 150kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 2252
Hanger with swan-neck, with 4 steel wheels mounted on ball bearings. Capacity per door: 150kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 2255
Hanger, top fixing, with 4 steel wheels mounted on ball bearings. Capacity per door: 150kg.
2 per pack.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 0288S
Hanger, top fixing, with steel wheels mounted on roller cages. Fixing bolt Ø M 20. Capacity per door: 1200 kg.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 2288S
Hanger top fixing with 4 wheels equipped with ball bearings. Recommanded for FIRE DOORS and other HIGH QUALITY doors. Capacity per door: 2000 kg. Fixing bolt Ø M 20.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 2285A
Hanger, top fixing with carbonized steel wheels mounted on ball bearings. Fixing bolt Ø M 16. Capacity per door: 800 kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 2285AL
Hanger with long fixing bolt (123 mm). Capacity per door: 800 kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 2285S
Hanger top fixing with 4 wheels equipped with ball bearings. Recommanded for FIRE DOORS and other HIGH QUALITY doors. Fixing bolt Ø M 20. Capacity per door: 1200 kg.
2 per pack.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 0251A
Hanger side-fixing, with 2 steel wheels mounted on roller cages. Capacity per door: 150kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 0251D
Hanger side-fixing with 2 Delrin wheels mounted on roller cages. Capacity per door: 150kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 0255A
Hanger top-fixing, with 2 steel wheels mounted on roller cages. Capacity per door: 150kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 0255AL
Hanger with long fixing bolt (118 mm). Capacity per door: 150kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 0281
Hanger, side fixing, with wheels mounted on roller cages. Removable flange, which enables 2 different positions and an adaptation to 2 different panel thicknesses. Capacity per door: 600kg.
View product
Technical drawings
Hanger
Ref: 0281S
Hanger with a bigger bore of the wheels and high precision roller cages. Capacity per door: 1200kg.
View product
Technical drawings
Hanger
Ref: 0285
Hanger top fixing, with 2 steel wheels mounted on roller cages. Vis d’accrochage Ø M 16. Capacity per door: 600 kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 0285L
Monture with long fixing bolt (123 mm). Capacity per door: 600 kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 0285S
Hanger, top fixing with 2 steel wheels mounted on high precicion roller cages . Fixing bolt Ø M 20. Capacity per door: 800 kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 0285SL
Hanger with long fixing bolt (133 mm). Capacity per door: 1200 kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 2285
Hanger, top fixing, 4 wheels with ball bearings, nylon tyre and glass fiber. Fixing bolt Ø M 16. Capacity per door: 600kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 0235A
Hanger, top fixing with 2 steel wheels mounted on roller cages. Capacity per door: 80kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 0235D
Hanger, top fixing with 2 Delrin wheels mounted on roller cages. Capacity per door: 80kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 2232
Hanger with swan-neck, with 4 steel wheels mounted on ball bearings. Capacity per door: 80kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 2235
Hanger top fixing, with 4 steel wheels mounted on ball bearings. Capacity per door: 80kg.
2 per pack.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 4655
Hanger with 2 steel rollers mounted in a roller frame; Door capacity 350 kg. Corresponding track: 6255.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 4540
Hanger with 2 Delrin rollers mounted in a roller frame. Door capacity 200 kg. Corresponding track: 5040.
View product
Technical drawings
Hanger
Ref: 4870
Hanger with 2 steel rollers mounted in a roller frame. Door capacity 450 kg. Corresponding track: 8570.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 9236
- Hanger on ball bearing with nylon binding - M12 stainless steel screw - 200 kg per panel
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 0663
Swivelling hanger with adjustable height, steel wheels, Ø M14 screw.
2 per pack.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 0633D
Swivelling hanger with adjustable height, Delrin wheels, Ø M10 screw.
Maximum load: 20 kg per panel.
Combined track: 3530.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 0683
Swivelling hanger with adjustable height, steel wheels, Ø M16 screw.
2 per pack.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 0532
Intermediate hanger, equipped with "top fixing" hinge with 2 needle-cage-bearings nylon wheels.
Maximum load / Capacity: 40Kg.
Combined track: 3530.
View product
Technical drawings
Hanger
Ref: 0532E
Offset end hanger, equipped with half hinge with 2 steel wheels mounted on balls.
Maximum load / Capacity : 20 Kg
Combined track: 3530.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 9242S
Roller with stainless steel framing and nylon wheels mounted on ball bearing top fixing Ø M14.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 9244
Hanger with swan neck bracket, with 4 steel rollers mounted on ball bearings. M16 screw. Capacity/door: 300 kg. Corresponding track: 9040.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 9262SE
- Hanger for automatic doors, idem 9262S equipped with a guiding wheel at each end.Capacity per door :700 kg
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 9264S
- Hanger with swanneck and 4 steel wheels mounted on ball bearings Capacity per door : 1200kg
Technical drawings
Hanger
Ref: 9265S
- Hanger with removable collar, with 4 steel wheels mounted on ball bearings Capacity per door : 1200kg
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 9268S
- Double hanger with removable collar, with 8 steel wheels mounted on ball bearings Capacity per door :2000kg
Technical drawings
Hanger
Ref: 9262S
- Hanger with swanneck and 4 steel wheels mounted on ball bearings. Capacity per door : 1200kg
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 9211
Hanger with swanneck and 2 steel wheels mounted on balls. Capacity per door : 60 kg.
View product
Technical drawings
Hanger
Ref: 9211W
- Hanger with swanneck and 2 steel wheels mounted on balls. Capacity per door : 60 kg
Technical drawings
Hanger
Ref: 99212
- Hanger with swanneck and 4 Delrin wheels mounted on smooth axle. Capacity per door : 60 kg
Technical drawings
Hanger
Ref: 99215
- Hanger with removable collar and 4 Delrin wheels mounted on smooth axle. Capacity per door : 60 kg
Technical drawings
Hanger
Ref: 9216
- Welding type hanger, with 4 steel wheels mounted on balls. Capacity per door : 60 kg
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 9212
Hanger with swanneck and 4 steel wheels mounted on balls. Capacity per door: 80 kg.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 9214
- Hanger with swanneck and 4 steel wheels mounted on balls. Capacity per door : 90 kg
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 9252S
- Roller with stainless steel framing and nylon wheels mounted on ball bearing top fixing Ø M12
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 9215
Hanger with removable collar and 4 steel wheels mounted on balls. Capacity per door : 80 kg.
View product
Technical drawings
Hanger
Ref: 9252SE
Hanger for automatic doors, with a swan neck bracket, 4 steels rollers mounted on ball bearings, and a guiding roller at each end. M16 screw. Capacity/door: 350 Kg. Corresponding track: 9050.
View product
Technical drawings
Hanger
Ref: 9252SEL
Hanger for automatic doors, with a swan neck bracket, 4 steels rollers mounted on ball bearings, and a guiding roller at each end. M16 screw, long (150 mm). Capacity/door: 350 kg. Corresponding track: 9050.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 0040-C
Universal face-mounted hangers (A or B depending on set-up) for panels up to 40 kg.
Hangers not compatible with 30 track, for wall mounting.
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 0700
Side fixing hanger - with cast iron roller mounted on ball bearings.
The left hanger and the right one are delivered together
Packaging: 2 pcs.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Technical drawings
Hanger
Ref: ROC1F
Side fixing hanger, equipped with steel wheel mounted on needle-cage-bearing.
Maximum load: 130 Kg per panel. Combined flat track: 50x10.
Technical drawings
Hanger
Ref: ROC2A
- Side fixing hanger - with delrin hub and steel flange mounted on roller cages.
Technical drawings
Hanger
Ref: ROC2F
Side fixing hanger, equipped with steel wheel mounted on needle-cage-bearing.
Maximum load : 200 Kg per panel. Combined flat track: 50x10.
Technical drawings
Hanger
Ref: 0250A
- Side fixing hanger - with nylon hub and steel flanges, mounted on roller cages
Technical drawings
Hanger
Ref: 0250F
Side fixing hanger, equipped with steel wheel mounted on needle-cage-bearing.
Maximum load : 250 Kg per panel. Combined flat track: 50x10.
The left side hanger and the right one are delivered together.
Technical drawings
Hanger
Ref: 0400
Side fixing hanger, equipped with steel wheel mounted on needle-cage-bearing.
Maximum load : 400 Kg per panel. Combined flat track: 50x12.
Technical drawings
Hanger
Ref: 9952N
Hanger with polyamide wheels mounted on high- precision ball bearings. For track : 10500 PAF.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9962S
Hanger with steel wheels mounted on high-precision ball bearings. For track : 9060.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9958N
Hanger with polyamide wheels mounted on high- precision ball bearings. For track : 10500 PAF.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9972S
- Hanger with steel wheels mounted on high-precision ball bearings. For track : 9070
Technical drawings
Hanger
Ref: 9962N
Hanger with polyamide wheels mounted on high- precision ball bearings. For track : 10600 PAF.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9968N
Hanger with polyamide wheels mounted on high- precision ball bearings. For track : 10600 PAF.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9958S
Hanger with steel wheels mounted on high-precision ball bearings. For track : 9050.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9968S
Hanger with steel wheels mounted on high-precision ball bearings. For track : 9060.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9978S
- Hanger with steel wheels mounted on high-precision ball bearings. For track : 9070
Technical drawings
Hanger
Ref: 9952S
Hanger with steel wheels mounted on high-precision ball bearings. For track : 9050.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9952PAF
Hanger equipped with reinforced ball bearings. For track : 9060.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9962PAF
Hanger equipped with reinforced ball bearings. For track : 9060.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9958PAF
Hanger equipped with reinforced ball bearings. For track : 9050.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9968PAF
Hanger equipped with reinforced ball bearings. For track : 9060.
2 per pack.
View product
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 9972PAF
Steel hanger, 4 steel rollers mounted on ball bearings. Hanger with roller guidance. Corresponding track: 9070.
View product
Technical drawings
Hanger
Ref: 11218HCX
- Hanger equipped with 4 rollers, pin mounted on ball bearings, M8 stainless steel screw - 80 Kg max./panel
Technical drawings
Hanger
Technical drawings
Hanger
Ref: 99232XA2
STAINLESS STEEL hanger with Delrin wheels on smooth axle, fixing screw Ø M 12) For doors up to 100 kg.
2 per pack.
View product
Technical drawings
Hanger
Ref: 9232XSA2
- STAINLESS STEEL hanger (with stainless steel wheels mounted on ball bearings, fixing bolt Ø M 12) - For doors up to 200 kg.
Technical drawings
Hanger SUPERCADETTE
Ref: 0224
- Hanger SUPERCADETTE with wheels mounted on a RILSAN ring, supplied with stop-plate and stop
Technical drawings
Heavy duty version for intensive use of the door (public places)
Ref: SFOLD80-2
Set for doors up to 80 Kg, including:
- 1 hanger 13232 (mounted on ball bearings);
- 1 12046 reinforced Plate + 1 track/panel height adjustment gauge;
- 6 reinforced 1575 concealed hinges;
- Fasteners and instructions.
Hinge
Ref: 1510DPXA2
Stainless steel hinge (XA2), offset, fastened on edge (with handle). Pin Ø = 10 mm.
View product
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Ref: 11508X
Adjustable polished stainless steel hinge, 2 mm. Dimensions: 65 X 62 mm. Stainless steel pin, 8 mm in diameter. Face-mounted.
View product
Technical drawings
Hinge
Ref: 1506P
Adjustable galvanized steel hinge, 2 mm. Dimensions: 40 X (47 + 30) mm. Steel pin, 6 mm in diameter. Face-mounted.
View productHinge
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Ref: 25164SO
Hinge, welding type M 16 - 180° orientable. For gate up to 80 kg max. Length : 125 mm.
View product
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Ref: 25183L
Screw-in hinge - M18, galvanized steel, screw-in clevis. For gates weighing up to 150 kg
View product
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Ref: 25165
Screw-in (M116) plate-mounted hinge, galvanized steel, screw-in clevis, for gates of up to 100 kg.
View product
Technical drawings
Hinge
Technical drawings
Hinge
Ref: 25183SOL
Screw-in hinge - M18, galvanized steel, weld-on clevis. For gates weighing up to 150 kg.
View product
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Ref: 25183
Weld-on hinge - M18, galvanized steel, screw-in clevis. For gates weighing up to 150 kg.
View product
Technical drawings
Hinge
Technical drawings
Hinge
Ref: 25184SO
- Hinge, welding type M 18 - 180° orientable. For gate up to 100 kg max. Length : 125 mm
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Ref: 1512C
- Screwing hinge 85 x 85, with a Ø 12 axle, top-fixing, for woods of 35 mm thick
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Technical drawings
Hinge
Ref: 1512SO3D
Weld-type split hinge, between two doors. Adjustable for the 3 dimensions. Pin Ø = 12 mm.
View product
Technical drawings
Hinge
Ref: 1512SOF3DD
Weld-type split hinge, between door and frame. Mounted on the right of the opening, (when you are on the track side). Adjustable for the 3 dimensions. Pin Ø = 12 mm.
View product
Technical drawings
Hinge
Ref: 1512SOF3DG
Weld-type split hinge, between door and frame. Mounted on the left of the opening, (when you are on the track side). Adjustable for the 3 dimensions. Pin Ø = 12 mm.
View product
Technical drawings
Hinge
Ref: 1512SOFG
Weld-type split hinge (with lubricator), between door and frame. Pin Ø = 12 mm.
View product
Technical drawings
Hinge
Ref: 1512SOG
Weld-type split hinge (with lubricator), between two doors. Pin Ø = 12 mm.
View product
Technical drawings
Hinge
Ref: 1504PI
Set of 3 special hinges with ball bearings.
Advantages:
Holds panels in closed position;
Eliminates play between panels (fastened to the back of the panels).
This special hinge is designed to replace the hinges in kit 1504C3 (3 for 2 panels and 6 for 4 panels).
The calculation formulas are different: use our SLIDSOFT® calculation software.
Technical drawings
Hook
Ref: 8632
Hook with safety catch, Ø14 - Inner diameter: 20 mm. Max. load: 150 Kg. (Corresponding MANTION track: 9040).
View productHook
Ref: 8732
Hook with safety catch, Ø16 - Inner diameter: 20 mm. Max. load: 250 kg. (Corresponding MANTION track: 9050/9060).
View productHook
Ref: 8832
Hook with safety catch, Ø16 - Inner diameter: 20 mm. Max. load: 250 kg. (Corresponding MANTION track: 9050)
View productHook
Ref: 8832S
Hook with safety catch, Ø20 - Inner diameter: 20 mm. Max. load: 500 Kg. (Corresponding MANTION track: 9060).
View productHook
Technical drawings
Hook
Technical drawings
Housing kit
Ref: SAF-INSIDECO70
View product
Technical drawings
Housing kit
Ref: SAF-INSIDECO80
View product
Technical drawings
Housing kit
Ref: SAF-INSIDECO90
View product
Technical drawings
Housing kit
Ref: SAF-INSIDECO100
View product
Technical drawings
Intermediate bottom guide
Technical drawings
Intermediate bottom guide
Technical drawings
Intermediate hanger
Technical drawings
Intermediate hanger
Technical drawings
Intermediate hanger
Technical drawings
Intermediate hanger
Technical drawings
Intermediate hanger
Technical drawings
Intermediate hanger
Technical drawings
Intermediate hanger
Technical drawings
Intermediate hanger
Technical drawings
Intermediate hanger
Technical drawings
Intermediate hanger
Technical drawings
Joining angle bracket
Ref: 13013M
Joining angle bracket (sliding) for joining 2 tracks 13108 or 13312 together.
View productJointing bracket
Technical drawings
Jointing bracket
Technical drawings
Jointing bracket
Technical drawings
Jointing bracket
Technical drawings
Jointing bracket
Technical drawings
Jointing bracket
Technical drawings
Jointing bracket
Technical drawings
Jointing bracket
Technical drawings
Jointing bracket
Technical drawings
Jointing bracket
Technical drawings
Jointing bracket
Technical drawings
Jointing bracket
Technical drawings
Jointing bracket
Technical drawings
Jointing bracket
Technical drawings
Jointing bracket
Technical drawings
Jointing bracket
Technical drawings
Jointing bracket
Technical drawings
Keeper
Keeper
Technical drawings
Keeper of bolt
Technical drawings
Keeper of bolt
Technical drawings
Keeper of bolt
Technical drawings
Keeper of bolt
Technical drawings
Keeper of lock
Kit
Ref: SAF-INSIDECO789F
Cladding kit for MDF door frame - suitable for SAF-INSIDECO70 and SAF-INSIDECO80.
View product
Technical drawings
Kit
Ref: SAF-INSIDECO9109F
Cladding kit for MDF door frame - suitable for SAF-INSIDECO90 and SAF-INSIDECO100.
View product
Technical drawings
Kit
Ref: MARS-325
Kit with 2 handles in brushed stainless steel finish - Height 325 mm - diameter 20 mm
View product
Technical drawings
Kit
Ref: JUPITER-408
Kit with 2 handles in brushed stainless steel finish - Height 408 mm - diameter 20 mm
View product
Technical drawings
Kit
Ref: MARS-375
Kit with 2 handles in brushed stainless steel finish - Height 375 mm - diameter 20 mm
View product
Technical drawings
Kit
Technical drawings
Kit
Ref: NEPTUNE-300
Kit with 2 handles in brushed stainless steel finish - Height 300 mm - diameter 20 mm
View product
Technical drawings
Kit
Ref: NEPTUNE-505
Kit with 2 handles in brushed stainless steel finish - Height 505 mm - diameter 20 mm
View product
Technical drawings
Kit
Ref: 11165
- Set of end caps consisting of: - 2 aluminium caps for pelmet 11163 - 8 4.8x19 stainless steel screws - 2 clips 11169
Technical drawings
Kit for 80 kg doors – standard 103 cm door – Black anodised finish
Ref: SAF-S82C/200
Set for doors weighing up to 80 kg - standard 103 cm doors:
- 1 SAF82A gear (closer available as an option)
- 1 track kit, 1995 mm long (to be cut to fit the door width)
- 1 set of end caps
Technical drawings
Kit for 80 kg doors – standard 103 cm door – natural anodised finish
Ref: SAF-S82D/200
Set for doors weighing up to 80 kg - standard 103 cm doors:
- 1 SAF82A gear (closer available as an option)
- 1 track kit, 1995 mm long (to be cut to fit the door width)
- 1 set of end caps
Technical drawings
Kit for 80 kg doors – standard 83 cm door – Black anodised finish
Ref: SAF-S82C/160
Set for doors weighing up to 80 kg - standard 83 cm doors:
- 1 SAF82A gear (closer available as an option)
- 1 track kit (track + track bracket), 1595 mm long (40x45 mm)
- 1 set of end caps
Technical drawings
Kit for 80 kg doors – standard 83 cm door – natural anodised finish
Ref: SAF-S82D/160
Set for doors weighing up to 80 kg - standard 83 cm doors:
- 1 SAF82A gear (closer available as an option)
- 1 track kit (track + track bracket), 1595 mm long (40x45 mm)
- 1 set of end caps
Technical drawings
Kit of 5 clips
Ref: 13008
Kit of 5 clips for fastening pelmets (every 700 mm at most) onto track 13108.
View productKit of 5 clips
Ref: 13012
Kit of 5 clips for fastening pelmets (every 700 mm at most) onto track 13312.
View productKit with two rods – For panels > 3 m high
Ref: GH10430KL-02
Kit with two bolt-type stainless steel rods. For panels over 3 m high.
View product
Technical drawings
Kit with two rods – For panels < 3 m high
Ref: GH10430KL-01
Kit with two bolt-type stainless steel rods. For panels under 3 m high.
View product
Technical drawings
Latch
Ref: 1313
- Nickel-plated brushed metal latch with strike plate, to be mounted on the jamb of the opening. Travel = 18 mm
Technical drawings
Lever handle
Lever handle
Lever handle
Ref: 1295-60
Aluminium lever handle white lacquered for tubes 30 to 60 mm square of 7mm (for lock 957).
View product
Technical drawings
Lock
Technical drawings
Lock
Technical drawings
Lock
Technical drawings
Lock
Ref: 0957
- Chassis and steel mechanism, bolt and headstall in STAINLESS STEEL. Aluminum lock plate lacquered white. For cylinder European profile 54mm
Technical drawings
Lock
Technical drawings
Lock
Ref: 102950GT
Stainless steel hook lock for glass door equipped with a European cylinder Delivered with 3 keys and a stainless steel keeper. For use with a timber door jamb.
View productLock kit
Ref: 0942-1
Lock kit, flush-mounted, brushed finish, includes :
- 1 hook lock (case 68 x 110 mm) + face plate (height 90 mm)
- 2-piece round turn and release set
- 1 finger pull
Locking kit
Ref: 1310BR
Locking system to hold a sliding shutter/shade screen in any position. Simply pull and hold the cable to release the shutter/screen. Then release the cable to hold the shutter/screen in place again. Stainless steel 2-metre-long sheathed cable.
View productLocks
Ref: 0954
- Hook lock in galvanized steel - Supplied with a European cylinder + 3 keys - A = 96, B = 60 , C = 174
Technical drawings
Locks
Ref: 0955
- Hook lock in galvanized steel. Supplied with a keeper of lock - A = 96, B = 60
Technical drawings
Locks
Ref: 0954X
- Hook lock with end section and box in stainless steel - Supplied with a European cylinder + 3 keys - A = 106 , B = 60 , C = 185
Technical drawings
Locks
Technical drawings
Locks
Technical drawings
Lower aluminium track – 2 m
Technical drawings
Lower aluminium track – 3 m
Technical drawings
Lower guide
Ref: 1101FXA2
Lower guide on plate to be screwed in. For 30x30 U-profile (item no. 1110).
View product
Technical drawings
Magnet kit
Ref: GHLK-01
Screw-type male/female magnet kit Enables doors to be held in the open position. Thickness = 26 mm. Ø = 30 mm. RAL 7016.
View product
Technical drawings
Magnet kit
Ref: GHLK-02
Screw-type male/female magnet kit Enables doors to be held in the open position. Thickness = 60 mm. Ø = 30 mm. RAL 7016.
View product
Technical drawings
Mortising plate
Technical drawings
Moulded notched
Technical drawings
Mounting plate to be screwed
Ref: 13044
Mounting plate to be screwed to the edge of the door.
For wood and metal frames: minimum door/rail gap 30 mm.
Black cataphoresis finish.
Technical drawings
Nylon guide
Technical drawings
Offset bottom guide
Technical drawings
Offset bottom guide
Technical drawings
Offset bottom guide
Technical drawings
Offset bottom guide
Technical drawings
Offset bottom guide
Technical drawings
Offset end
Technical drawings
Offset end hanger
Technical drawings
Offset end hanger
Technical drawings
Offset end hanger
Technical drawings
Offset end hanger
Technical drawings
Olive
Technical drawings
Ornamental
Technical drawings
Ornamental
Technical drawings
Ornamental
Technical drawings
Ornamental cap
Technical drawings
Ornemental stop
Technical drawings
Pelmet
Technical drawings
Pelmet
Technical drawings
Pelmet
Technical drawings
Pelmet
Technical drawings
Pelmet
Technical drawings
Pelmet
Technical drawings
Pelmet – 1,25 m
Technical drawings
Pelmet – 1.25 m
Ref: 2531/125
Electrogalvanized steel pelmet* in lengths of 1.25 m. *To be painted – available in RAL colours upon request.
View product
Technical drawings
Pelmet – 2,5 m
Technical drawings
Pelmet – 2,5 m
Technical drawings
Pelmet – 2,5 m
Technical drawings
Pelmet – 2,50 m
Ref: 2531/250
Electrogalvanized steel pelmet* in lengths of 2.5 m. *To be painted – available in RAL colours upon request.
View product
Technical drawings
Pelmet – 6 m
Technical drawings
Pins
Technical drawings
Pivot
Ref: 25052
- Pivot Ø 50 in dichromated steel. With "L" fastener, screwing type for heavy manual or motorized gates. The screws enable an adjustment on both upper and lower parts.
Technical drawings
Pivot
Technical drawings
Pivot
Technical drawings
Pivot
Ref: 25072
- Pivot Ø 70 in dichromated steel. With "L" fastener, screwing type for heavy manual or motorized gates. The screws enable an adjustment on the both upper and lower parts.
Technical drawings
Pivot
Technical drawings
Pivot
Ref: 25051X
Pivot Ø 50 in stainless steel, with sealing fastener for heavy manual or motorized gates. Adjustable on the upper part.
View product
Technical drawings
Pivot
Ref: 25051
Pivot (lower and upper part) Ø 50 in dichromated steel for heavy manual or motorized gates.
View product
Technical drawings
Pivot
Technical drawings
Pivot
Technical drawings
Pivot
Ref: 25071
- Pivot Ø 70 in dichromated steel, with sealing fastener for heavy manual or motorized gates. Adjustable on the upper part.
Technical drawings
Pivot
Technical drawings
Pivot
Technical drawings
Pivot
Technical drawings
Pivot
Technical drawings
Pivot
Technical drawings
Pivot
Technical drawings
Pivot
Technical drawings
Pivot
Technical drawings
Plastic runner
Ref: 1129
- Grey plastic runner on stainless steel plate to be attached under the panel Used with profiles 11121 and 11122
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Ref: 0037XA2
- Stainless steel plate to be screwed on flat side (95 x 62 mm) min. panel 30 mm.
Technical drawings
Plate
Ref: 11036L-1
Angle plate, screwed in at the end of the panel. Enables the door to be mounted in alignment with the track. For panels up to 120 kg.
If using damper(s) M65S / M66S / M67S / M68S:
- for 1 damper: min. width of door: 890 mm;
- for 2 dampers: min. width of door: 940 mm.
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Technical drawings
Plate
Ref: 1709
Jointing plate for track elements in flat iron or for profiles of 40 x 6 mm section and/or 50 X 6 mm section.
View product
Technical drawings
Plate
Ref: 12036
Plate for side-mounted doors. L = 127 mm. Can be installed flush to obtain the smallest gap between the track and door (min. gap of 11 mm required).
View product
Technical drawings
Plate
Ref: 10036
Screw-in plate, fixed on the edge for a front-mounted door. Length = 110 mm.
View product
Technical drawings
Plate
Ref: 11036
Plate for side-mounted doors. L = 127 mm. Can be installed flush to obtain the smallest gap between the track and door (min. gap of 11 mm required).
View productPlate
Technical drawings
Plate
Ref: 0026XA2
A2 stainless steel plate to be screwed on edge. Panel thickness: 25 mm min.
View product
Technical drawings
Plate
Ref: 0027XA2
A2 stainless steel bracketto be screwed on panel face (80 x 58 mm). Panel thickness: 28 to 36 mm.
View product
Technical drawings
Plate
Technical drawings
Plate in stainless steel
Ref: 1102
Plate in stainless steel with an olive guide, screwing type.
For 25 x 18 U-PROFILE 1109A. For doors up to 150 kg.
Point set
Technical drawings
Product
Ref: SC-70GA10
View product
Technical drawings
Product
Ref: SC-80GA10
View product
Technical drawings
Product
Ref: SC-90GA10
View product
Technical drawings
Product
Ref: SC-100GA10
View product
Technical drawings
Product
Ref: 8331
View product
Product
Ref: SATURNE-365
View product
Producto
Ref: SC-70GA8
View product
Technical drawings
Producto
Ref: SC-80GA8
View product
Technical drawings
Producto
Ref: SC-90GA8
View product
Technical drawings
Producto
Ref: SC-100GA8
View product
Technical drawings
Produit
Ref: SAF-INSIDE789F
View product
Technical drawings
Produit
Ref: SAF-INSIDE9109F
View product
Technical drawings
Produit
Ref: 66RSI
View product
Technical drawings
Produit
Ref: 11288M15
View product
Produit
Ref: 11208AP/600
View product
Technical drawings
Produkt
Ref: 11261/200
View product
Technical drawings
Produkt
Ref: 11261/300
View product
Technical drawings
Produkt
Ref: 8531
View product
Profile – 1 m
Technical drawings
Profile – 1,50 m
Technical drawings
Profile – 2 m
Technical drawings
Profile – 2 m
Technical drawings
Profile – 2 m
Ref: 61T/200B
FINISHING PROFILES in lengths of 2 m - White lacquered aluminum profile (RAL 9016).
View product
Technical drawings
Profile – 2,5 m
Technical drawings
Profile – 3 m
Ref: GB6320
Anodised aluminium Profile to hide the fixed partition in the opening bay . Length = 3 m.
View product
Technical drawings
Profile – 3 m
Ref: GB6331
Anodised aluminium U-Profile to be screwed into floor and wall to retain the fixed glass partition - Length = 3 m.
View product
Technical drawings
Profile – L = 3 m
Technical drawings
Profile – L = 3 m
Technical drawings
Profile – Length = 6 m
Ref: GB6330
- Anodised aluminium U-Profile to be screwed into floor and wall to retain the fixed glass partition - Length = 6 m
Technical drawings
Protective olive
Ref: 1130
Soft protective olive on stainless steel plate to be attached under the panel Used with profiles 11121 - 11122 and 11109
View product
Technical drawings
Pull
Technical drawings
Pulley
Ref: 4090
Swinging pulley Ø ext. : 90 mm - Ø groove : 75 mm - for cables of Ø max. 4 mm.
View product
Technical drawings
Rack
Ref: 3012CSC
- Additionnal rack allowing closing time adjustment (for SC-145 kit : you have to use 2 racks)
Technical drawings
Rack
Ref: 2222CR
- Rack for motorized gates Length : 1 m. Module 4 - 22 x 22 in galvanized steel
Technical drawings
Rack
Ref: 3012CR
- Rack for motorized gates Length: 1 m. Module 4 - Drilled for a M8 screw - 30x12 in black vernish steel.3 pins/rack
Technical drawings
Rack
Ref: 3012CP
- Rack with a compound-filled steel core. 20 x 77 mm section. Length : 0.33 m - Module : 4
Technical drawings
Raw aluminium pelmet Win-Slide 2 – 6 m
Technical drawings
Raw aluminium profile – 29 cm
Ref: 28FC-29
Raw aluminium profile, section 34 x 30 mm for fixing the flushmounted plate 13040. Length = 29 cm.
View product
Technical drawings
Raw aluminium profile – 600 cm
Ref: 28FC-600
Raw aluminium profile, section 34 x 30 mm for fixing the flushmounted plate 13040. Length = 600 cm.
View product
Technical drawings
Raw aluminium track – 6 m
Technical drawings
Raw aluminium track Win-Slide 2 – 6 m
Ref: 11208P/600
Raw aluminium track, section 39 x 36 mm, drilled every 450 mm.
Length = 6 m.
Technical drawings
Ready-to-install set – opening of 0,73 m to 0,83 m
Ref: GB0100
Ready-to-install set - opening of 0.73 m to 0.83 m includes:
- 1 anodised aluminium track with wall mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 1 roller kit with clamps and damper;
- 2 end stops;
- 2 anodised aluminium end caps;
- 2 fastening clips for pelmet;
- 1 lower guide;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 0,93 m to 1,13 m
Ref: GB0102
Ready-to-install set - opening of 0,93 m to 1,13 m includes:
- 1 anodised aluminium track with wall mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 1 roller kit with clamps and damper;
- 2 end stops;
- 2 anodised aluminium end caps;
- 2 fastening clips for pelmet;
- 1 lower guide;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 0.73 m to 0.83 m
Ref: GB0200
Ready-to-install set - opening of 0.73 m to 0.83 m includes:
- 1 anodised aluminium track with ceiling mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 1 roller kit with clamps and damper;
- 2 end stops;
- 2 anodised aluminium end caps;
- 2 fastening clips for pelmet;
- 1 lower guide;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 0.83 m to 0.93 m
Ref: GB0101
Ready-to-install set - opening of 0.83 m to 0.93 m includes:
- 1 anodised aluminium track with wall mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 1 roller kit with clamps and damper;
- 2 end stops;
- 2 anodised aluminium end caps;
- 2 fastening clips for pelmet;
- 1 lower guide;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 0.83 m to 0.93 m
Ref: GB0201
Ready-to-install set - opening of 0.83 m to 0.93 m includes:
- 1 anodised aluminium track with ceiling mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 1 roller kit with clamps and damper;
- 2 end stops;
- 2 anodised aluminium end caps;
- 2 fastening clips for pelmet;
- 1 lower guide;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 0.93 m to 1.13 m
Ref: GB0202
Ready-to-install set - opening of 0.93 m to 1.13 m includes:
- 1 anodised aluminium track with ceiling mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 1 roller kit with clamps and damper;
- 2 end stops;
- 2 anodised aluminium end caps;
- 2 fastening clips for pelmet;
- 1 lower guide;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 1.13 m to 1.33 m
Ref: GB0103
Ready-to-install set - opening of 1.13 m to 1.33 m includes:
- 1 anodised aluminium track with wall mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 1 roller kit with clamps and damper;
- 2 end stops;
- 2 anodised aluminium end caps;
- 2 fastening clips for pelmet;
- 1 lower guide;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 1.13 m to 1.33 m
Ref: GB0203
Ready-to-install set - opening of 1.13 m to 1.33 m includes:
- 1 anodised aluminium track with ceiling mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 1 roller kit with clamps and damper;
- 2 end stops;
- 2 anodised aluminium end caps;
- 2 fastening clips for pelmet;
- 1 lower guide;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 1.33 m to 1.53 m
Ref: GB0210
Ready-to-install set - opening of 1.33 m to 1.53 m includes:
- 1 anodised aluminium track with ceiling mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and damperss;
- 1 cable-operated synchronisation kit;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 1.33 m to 1.53 m
Ref: GB0110
Ready-to-install set - opening of 1.33 m to 1.53 m includes:
- 1 anodised aluminium track with wall mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and damperss;
- 1 cable-operated synchronisation kit;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 1.53 m to 1.73 m
Ref: GB0211
Ready-to-install set - opening of 1.53 m to 1.73 m includes:
- 1 anodised aluminium track with ceiling mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and dampers;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 1.53 m to 1.73 m
Ref: GB0112
Ready-to-install set - opening of 1.53 m to 1.73 m includes:
- 1 anodised aluminium track with wall mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and damperss;
- 1 cable-operated synchronisation kit;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 1.53 m to 1.73 m
Ref: GB0212
Ready-to-install set - opening of 1.53 m to 1.73 m includes:
- 1 anodised aluminium track with ceiling mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and damperss;
- 1 cable-operated synchronisation kit;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 1.53 m to 1.73 m
Ref: GB0111
Ready-to-install set - opening of 1.53 m to 1.73 m includes:
- 1 anodised aluminium track with wall mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 1 roller kit with clamps and damper;
- 2 end stops;
- 2 anodised aluminium end caps;
- 2 fastening clips for pelmet;
- 1 lower guide;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 1.73 m to 1.93 m
Ref: GB0213
Ready-to-install set - opening of 1.73 m to 1.93 m includes:
- 1 anodised aluminium track with ceiling mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and dampers;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 1.73 m to 1.93 m
Ref: GB0114
Ready-to-install set - opening of 1.73 m to 1.93 m includes:
- 1 anodised aluminium track with wall mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and damperss;
- 1 cable-operated synchronisation kit;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 1.73 m to 1.93 m
Ref: GB0214
Ready-to-install set - opening of 1.73 m to 1.93 m includes:
- 1 anodised aluminium track with ceiling mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and damperss;
- 1 cable-operated synchronisation kit;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 1.73 m to 1.93 m
Ref: GB0113
Ready-to-install set - opening of 1.73 m to 1.93 m includes:
- 1 anodised aluminium track with wall mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 1 roller kit with clamps and damper;
- 2 end stops;
- 2 anodised aluminium end caps;
- 2 fastening clips for pelmet;
- 1 lower guide;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 1.93 m to 2.13 m
Ref: GB0215
Ready-to-install set - opening of 1.93 m to 2.13 m includes:
- 1 anodised aluminium track with ceiling mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and dampers;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 1.93 m to 2.13 m
Ref: GB0116
Ready-to-install set - opening of 1.93 m to 2.13 m includes:
- 1 anodised aluminium track with wall mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and damperss;
- 1 cable-operated synchronisation kit;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 1.93 m to 2.13 m
Ref: GB0216
Ready-to-install set - opening of 1.93 m to 2.13 m includes:
- 1 anodised aluminium track with ceiling mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and damperss;
- 1 cable-operated synchronisation kit;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 1.93 m to 2.13 m
Ref: GB0115
Ready-to-install set - opening of 1.93 m to 2.13 m includes:
- 1 anodised aluminium track with wall mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 1 roller kit with clamps and damper;
- 2 end stops;
- 2 anodised aluminium end caps;
- 2 fastening clips for pelmet;
- 1 lower guide;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 2.13 m to 2.33 m
Ref: GB0117
Ready-to-install set - opening of 2.13 m to 2.33 m includes:
- 1 anodised aluminium track with wall mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 1 roller kit with clamps and damper;
- 2 end stops;
- 2 anodised aluminium end caps;
- 2 fastening clips for pelmet;
- 1 lower guide;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 2.13 m to 2.33 m
Ref: GB0118
Ready-to-install set - opening of 2.13 m to 2.33 m includes:
- 1 anodised aluminium track with wall mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and damperss;
- 1 cable-operated synchronisation kit;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 2.13 m to 2.33 m
Ref: GB0218
Ready-to-install set - opening of 2.13 m to 2.33 m includes:
- 1 anodised aluminium track with ceiling mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and damperss;
- 1 cable-operated synchronisation kit;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 2.13 m to 2.33 m
Ref: GB0217
Ready-to-install set - opening of 2.13 m to 2.33 m includes:
- 1 anodised aluminium track with ceiling mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and dampers;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 2.33 m to 2.53 m
Ref: GB0119
Ready-to-install set - opening of 2.33 m to 2.53 m includes:
- 1 anodised aluminium track with wall mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 1 roller kit with clamps and damper;
- 2 end stops;
- 2 anodised aluminium end caps;
- 2 fastening clips for pelmet;
- 1 lower guide;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 2.33 m to 2.53 m
Ref: GB0120
Ready-to-install set - opening of 2.33 m to 2.53 m includes:
- 1 anodised aluminium track with wall mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and damperss;
- 1 cable-operated synchronisation kit;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 2.33 m to 2.53 m
Ref: GB0220
Ready-to-install set - opening of 2.33 m to 2.53 m includes:
- 1 anodised aluminium track with ceiling mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and damperss;
- 1 cable-operated synchronisation kit;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge;
- Installation instructions and tools.
Technical drawings
Ready-to-install set – opening of 2.33 m to 2.53 m
Ref: GB0219
Ready-to-install set - opening of 2.33 m to 2.53 m includes:
- 1 anodised aluminium track with ceiling mounting holes - cut to length;
- 1 anodised aluminium track pelmet - cut to length;
- 2 roller kits with clamps and dampers;
- 4 end stops;
- 2 anodised aluminium end caps;
- 3 fastening clips for pelmet;
- 2 lower guides and 1 translucent adhesive seal for door edge;
- Installation instructions and tools.
Technical drawings
Rectangular recessed handles chrome-plated metal
Technical drawings
Rectangular recessed handles gold-plated metal
Technical drawings
Reinforced cog belt
Technical drawings
Reinforced cog belt
Technical drawings
Reinforced cog belt
Technical drawings
Reinforced cog belt
Technical drawings
Reinforced cog belt
Technical drawings
Reinforced cog belt
Technical drawings
Reinforced U plate
Technical drawings
Reinforced U plate
Technical drawings
Remote control
Ref: C0004780
Radio transmitter, wireless switch, ideal for renovation: no cables to lay! 433.92 MHz remote control.
View product
Technical drawings
Return pulley
Technical drawings
Return pulley
Technical drawings
Ring
Ref: 8731
Galvanized steel ring, Ø16 - Ring inner diameter: Ø35. Max. load: 250 kg. (Corresponding MANTION track: 9050/9060)
View productRing
Ref: 8831
Galvanized steel ring, Ø16 - Ring inner diameter: Ø35. Max. load: 250 kg. (Corresponding MANTION track: 9050).
View productRing
Ref: 8831S
Galvanized steel ring, Ø20 - Ring inner diameter: Ø40. Max. load: 500 Kg. (Corresponding MANTION track: 9060)
View productRing
Ref: 8631
Galvanized steel ring, Ø14 - Ring inner diameter: Ø30. Max. load: 150 kg. (Corresponding MANTION track: 9040).
View productRoller with stainless steel
Ref: 13240
Roller with stainless steel framing and nylon wheels mounted on ball bearing.
Black cataphoresis finish.
Technical drawings
Round recessed handles beige colour
Technical drawings
Round recessed handles black colour
Technical drawings
Round recessed handles brown colour
Technical drawings
Round recessed handles chrome-plated metal
Ref: 1293-8
Round recessed handles in chrome-plated metal Ø 35 mm (ideal for door edge)
View product
Technical drawings
Round recessed handles gold colour
Technical drawings
Round recessed handles gold-plated metal
Technical drawings
Round recessed handles silver colour
Technical drawings
Round recessed handles white colour
Technical drawings
Runner
Ref: 1129D
Grey plastic runner on stainless steel plate to be attached under the follower panel Used with profile 11122 on 2nd track
View product
Technical drawings
Runner
Ref: 1128ARG
- White plastic adjustable guide (14 to 30 mm) on steel bracket with cataphoretic coating + RAL 9010 white epoxy paint
Technical drawings
Runner
Ref: 1128GU
Grey plastic runner on stainless steel bracket for 25 x 17 and 30 x 30 U-profiles
View product
Technical drawings
Runner
Ref: 1128DGU
Dual grey plastic runner on stainless steel bracket for 25 x 17 and 30 x 30 U-profiles and 4 mm flat
View product
Technical drawings
Runner
Ref: 11110GDU
- Grey plastic runner with screw and S6 plug for 25 x 17 and 30 x 30 U-profiles and 4 mm flat iron
Technical drawings
Runner
Ref: 11110GU
- Grey plastic screw-in runner for 25 x 17 mm and 30 x 30 mm U-profiles and 4 mm flat iron
Technical drawings
SAF-FOLD set for doors up to 80 kg
Ref: SFOLD80-140-1
Set for doors up to 80 Kg, including:
- 1 13108 anodised aluminium track. L = 1.4 m drilled every 0.44 m;
- 1 hanger (mounted on ball bearings);
- 1 12036Z Plate + 1 track/panel height adjustment gauge;
- 6 1540 concealed hinges;
- Fasteners and installation instruction.
Seal
Technical drawings
Seal
Ref: GB5351
Translucent adhesive seal for sticking on the edge of the glass panel. Length = 3 m.
View product
Technical drawings
Seal
Ref: GHMIN603
Black plastic threshold seal. Fastened onto the threshold for better sealing. 10 mm. Sold by the metre.
View product
Technical drawings
Seal strip
Ref: 66JN/250
Bi-material adhesive rubber seal strip to stick on the edge of the door to cushion the closing.
View product
Technical drawings
Sealing bar
Ref: 1760
Sealing bar - 35 x 5 mm section and 720 mm length - For curves 1702 L and 1722 L
View product
Technical drawings
Sealing bar
Technical drawings
Sealing bar
Technical drawings
Set
Technical drawings
Set
Technical drawings
Set
Technical drawings
Set
Technical drawings
Set
Ref: TUB40-194
Set includes:
- 1 aluminium double track, length = 1.94 m;
- 1 TUB40-2 gear for 2 face-mounted panel;
- screws and installation instructions.
Set – 10 mm – Opening: 1400 to 1450 mm
Ref: SC-145GA10
Set includes:
- 1 aluminium track;
- 1 pelmet with 2 end caps + 2 pelmet mounts;
- 2 aluminium clamps;
- 2 hangers;
- 1 clamp cover;
- 1 braking device;
- 1 toothed rack;
- 1 control box;
- 1 door holder kit;
- 2 stops;
- 1 guide.
Technical drawings
Set – 2 m
Ref: 72/200A
Set of natural anodised tracks in 2 m lengths for 2 panels:
- 1 aluminium set of upper and lower tracks + housing in 2 m. length
- 1 aluminium finishing profile 61T of 2 m. lenght
- 4 PICO59 rollers and 4 PICO59 guides
- Screws and mounting instructions
Technical drawings
Set – 2m
Ref: 72/200B
Set of lacquered white (RAL 9016) finishing tracks in 2 m lengths for 2 panels:
- 1 set of upper and lower tracks + housing in 2 m. length
- 1 profile 61T of 2 m. lenght
- 4 PICO59 rollers and 4 PICO59 guides
- Screws and mounting instructions
Technical drawings
Set – 3 m
Ref: 72/300A
Set of natural anodised tracks in 3 m lengths for 3 panels:
- 1 aluminium set of upper and lower tracks + housing in 3 m. length
- 1 aluminium finishing profile 61T of 2 m. lenght
- 6 PICO59 rollers and 6 PICO59 guides
- Screws and mounting instructions
Technical drawings
Set – 3 m
Ref: 72/300B
Set of lacquered white (RAL 9016) finishing tracks in 3 m lengths for 3 panels:
- 1 set of upper and lower tracks + housing in 3 m. length
- 1 profile 61T of 2 m. lenght
- 6 PICO59 rollers and 6 PICO59 guides
- Screws and mounting instructions
Technical drawings
Set – 8 mm – bay: 1400 to 1450 mm
Ref: SC-145GA8
Set including:
- 1 aluminium track;
- 1 headband with 2 end caps + 2 headband supports;
- 2 aluminium clamps;
- 2 hangers;
- 1 clamp cover;
- 1 rack brake;
- 1 rack;
- 1 control box - door holding kit;
- 2 stops;
- 1 guide.
Technical drawings
Set – Track 1.20 m
Ref: TANGO40-120
Set for 2 panels including : 1 aluminium track of 1.20 m (SAF), 1 SAF hanger (ball bearings) with plate, 1 upper pivot, 1 lower pivot, 3 hinges 1504C3, screws and mounting instructions.
View product
Technical drawings
Set – Track 1.50 m
Ref: TANGO40-150
Set for 2 panels including:
- 1 aluminium track of 1.50 m (SAF);
- 1 SAF hanger (ball bearings) with plate;
- 1 upper pivot;
- 1 lower pivot;
- 3 hinges 1504C3;
- Screws and mounting instructions.
Technical drawings
Set – Track 2 m
Ref: TANGO40-200
Set for 4 panels including :
- 1 aluminium track of 2 m (SAF)
- 2 SAF hangers (ball bearings) with plate
- 2 upper pivots
- 2 lower pivots
- 6 hinges 1504C3
- Screws and mounting instructions.
Technical drawings
Set – Track 3 m
Ref: TANGO40-300
Set for 4 panels including :
- 1 aluminium track of 3 m (SAF)
- 2 SAF hangers (ball bearings) with plate
- 2 upper pivots
- 2 lower pivots
- 6 hinges 1504C3
- Screws and mounting instructions.
Technical drawings
Set for doors 1030 to 1080 mm wide
Ref: SC-100
Set for doors 1030 to 1080 mm wide including:
- 1 track in anodized aluminium
- 1 pelmet in anodized aluminium with 2 ends and 2 pelmet brackets
- 2 rollers with ball bearings mounted on plates
- 1 hydraulic brake
- 1 rack
- 1 door closing device (spiral spring)
- 1 «open door» device
- 2 stoppers
- 1 adjustable «open door» stop
- 1 bottom guide
- Screws and assembly instructions
Technical drawings
Set for doors 1480 to 1530 mm wide
Ref: SC-145
Set for doors 1480 to 1530 mm wide including:
- 1 track in anodized aluminium
- 1 pelmet in anodized aluminium with 2 ends and 2 pelmet brackets
- 2 rollers with ball bearings mounted on plates
- 1 hydraulic brake
- 1 rack
- 1 door closing device (spiral spring)
- 1 «open door» device
- 2 stoppers
- 1 adjustable «open door» stop
- 1 bottom guide
- Screws and assembly instructions
Technical drawings
Set for doors 730 to 780 mm wide
Ref: SC-70
Set for doors 730 to 780 mm wide including:
- 1 track in anodized aluminium
- 1 pelmet in anodized aluminium with 2 ends and 2 pelmet brackets
- 2 rollers with ball bearings mounted on plates
- 1 hydraulic brake
- 1 rack
- 1 door closing device (spiral spring)
- 1 «open door» device
- 2 stoppers
- 1 adjustable «open door» stop
- 1 bottom guide
- Screws and assembly instructions
Technical drawings
Set for doors 830 to 880 mm wide
Ref: SC-80
Set for doors 830 to 880 mm wide including:
- 1 track in anodized aluminium
- 1 pelmet in anodized aluminium with 2 ends and 2 pelmet brackets
- 2 rollers with ball bearings mounted on plates
- 1 hydraulic brake
- 1 rack
- 1 door closing device (spiral spring)
- 1 «open door» device
- 2 stoppers
- 1 adjustable «open door» stop
- 1 bottom guide
- Screws and assembly instructions
Technical drawings
Set for doors 930 to 980 mm wide
Ref: SC-90
Set for doors 930 to 980 mm wide including:
- 1 track in anodized aluminium
- 1 pelmet in anodized aluminium with 2 ends and 2 pelmet brackets
- 2 rollers with ball bearings mounted on plates
- 1 hydraulic brake
- 1 rack
- 1 door closing device (spiral spring)
- 1 «open door» device
- 2 stoppers
- 1 adjustable «open door» stop
- 1 bottom guide
- Screws and assembly instructions
Technical drawings
Set for doors up to 40 kg
Ref: MA40A-165
Set for doors up to 40 kg including :
- 1 aluminium track (L = 1.65 m) drilled every 0.44 m + bubble level
- 2 hangers MA40A with 2 plates 10036
- 2 end stops
- 1 guide 1103
Technical drawings
Set for doors up to 40 kg
Ref: MA40A-190
Set for doors up to 40 kg including :
- 1 aluminium track (L = 1.90 m) drilled every 0.44 m + bubble level
- 2 hangers MA40A with 2 plates 10036
- 2 end stops
- 1 guide 1103
Technical drawings
Set for doors up to 40 kg
Ref: MA40A-240
Set for doors up to 40 kg including :
- 1 aluminium track (L = 2.40 m) drilled every 0.44 m + bubble level
- 2 hangers MA40A with 2 plates 10036
- 2 end stops
- 1 guide 1103
Technical drawings
Set for doors up to 40 Kg – Aluminium track L: 1.85 m
Ref: CAD185A-1
Set for doors up to 40 Kg including :
- 1 track 2526F/185 (aluminium - 1.85 m)
- 2 rollers 0222 supplied with 2 plates 0026 and 0021
- 2 end stops 1097
- 1 guide 1103
- 1 spirit level
- Screws, spanner and mounting instructions
Set for doors up to 40 Kg – Steel track L: 1.85 m
Ref: CADETT185-1
Set for doors up to 40 Kg including:
- 1 track 2525F/185 (steel - 1.85 m)
- 2 rollers 0222 supplied with 2 plates 0026 and 0021
- 2 end stops 1097
- 1 guide 1103
- Screws, spanner and mounting instructions
Set for doors up to 60 Kg – Aluminium track L: 1.85 m
Ref: SUPCAD185A-1
Set for doors up to 60 Kg including :
- 1 track 2526F/185 (aluminium - 1.85 m)
- 2 rollers 0224 with monobloc plates and crash-stops
- 1 guide 1103R
- 1 spirit level
- Screws, spanner and mounting instructions
Set for doors up to 60 Kg – Steel track L: 1.85 m
Ref: SUPCAD185-1
Set for doors up to 60 Kg including:
- 1 track 2525F/185 (steel - 1.85 m)
- 2 rollers 0224 with monobloc plates and crash-stops
- 1 guide 1103R
- Screws, spanner and mounting instructions
Set for doors up to 60 Kg – Steel track L: 2.30 m
Ref: SUPCAD230-1
Set for doors up to 60 Kg including:
- 1 track 2525F/230 (steel - 2.30 m)
- 2 rollers 0224 with monobloc plates and crash-stops
- 1 guide 1103R
- Screws, spanner and mounting instructions
Set for doors up to 80 kg
Ref: MA80A-165
Set for doors up to 80 kg, includes:
- 1 aluminium track (L = 1.65 m) drilled every 0.44 m + bubble level;
- 2 hangers MA40A with 2 plates 10036;
- 2 end stops;
- 1 guide 1103R.
Technical drawings
Set for doors up to 80 kg
Ref: MA80A-190
Set for doors up to 80 kg, includes:
- 1 aluminium track (L = 1.90 m) drilled every 0.44 m + bubble level;
- 2 hangers MA40A with 2 plates 10036;
- 2 end stops;
- 1 guide 1103R.
Technical drawings
Set for doors up to 80 kg
Ref: MA80A-300
Complete set for 80 Kg doors comprising:
- 1 raw aluminium track in 3 m length drilled every 0.44 m;
- 1 Buly® (spirit level);
- 2 rollers MA80A and 2 plates 10036;
- 2 adjustable stops;
- 1 guide 1103R;
- Spanner, screws and assembly instructions.
Set for doors up to 80 Kg
Ref: SFOLD80-1
Set for doors up to 80 Kg, including:
- 1 hanger (mounted on ball bearings) ;
- 1 12036Z Plate + 1 track/panel height adjustment gauge ;
- 6 1540 concealed hinges ;
- Fasteners and installation instructions.
Set for two panels – 2 m
Ref: PICO26-200T
Set includes:
- 4 screw-in tracks 25V/200M, 2 m long;
- 2 sets of gear PICO26;
- screws and installation instructions.
Sets packaged in a PET tube. Ideal for self-service display.
View product
Technical drawings
Set for Up and Over door
Ref: 4001
Kit including :
- 2 hangers ref. 4450;
- 1 guide ref. 4451 D;
- 1 guide ref. 4451 G;
- 4 pulleys ref. 4090;
- 2 plates ref. 7153;
- 2 plates ref. 7153 L.
Technical drawings
Set for Up and Over door
Ref: 4002
Kit including :
- 2 hangers ref. 4540,
- 1 guide ref. 4541 D,
- 1 guide ref. 4541 G,
- 4 sheaves ref. 4145 F,
- 2 angle plates ref. 5043,
- 4 top-fixing plates ref. 5044,
- 4 brackets ref. 5041.
Technical drawings
Set MINITU 100
Ref: MINITU100
Set including :
- 4 sliders Minitub in white polyamide 0111 ;
- 3 guides 1123 ;
- 2 finger pulls 1293 ;
- 2 tracks 1609 - 1 m long ;
- Screws and mounting instructions.
Technical drawings
Set MINITU 150
Ref: MINITU150
Set including :
- 4 sliders Minitub in white polyamide 0111;
- 3 guides 1123;
- 2 finger pulls 1293;
- 2 tracks 1609 - 1,5 m long;
- Screws and mounting instructions.
Technical drawings
Set of 5 anodised aluminium brackets Win-Slide 2
Ref: 11294A
Set of 5 anodised aluminium brackets. For mounting banner 11261. Supplied with A4 stainless steel screws.
Fixes every 450 mm.
Technical drawings
Set of curves
Ref: 4050CP
Set of 2 curves - To be used in case of automatic door for a perfect running.
View product
Technical drawings
Set of end caps
Ref: GH10430EN
Set of black raw plastic end caps for pelmets (GH10430P). End caps can be painted on request in your choice of RAL colour.
View product
Technical drawings
Set of end caps
Set of end caps
Set of end caps
Set of end caps
Set of end caps black anodised finish
Technical drawings
Set of end caps natural anodised finish
Technical drawings
Set of hinges
Ref: GH10430H
Set of 3 stainless steel hinges (XA2), centred, fastened on edge. Pin Ø = 10 mm.
View product
Technical drawings
Set of hinges
Ref: GH10430HO
Set of 3 stainless steel hinges (XA2), offset, fastened on edge. Pin Ø = 10 mm.
View product
Technical drawings
Set of hinges
Ref: GH10430HOH
Set of 3 stainless steel hinges (XA2), offset, fastened on edge (with handle). Pin Ø = 10 mm.
View product
Technical drawings
Set of pelmet mounts
Ref: GH10430BP
Set of 4 black plastic pelmet brackets (GH10430P). Fastened to track 10400A if track is wall-mounted.
View product
Technical drawings
Set of tracks
Ref: 70/600A
- Set of aluminium tracks, anodized aluminium - L = 6 m, including: 1 upper guiding track - 1 lower guiding track - 1 cover to hide fixing screws (to be clipped on the lower track)
Technical drawings
Set of tracks
Ref: 70/600B
- Set of aluminium tracks, bronze colour - L = 6 m, including: 1 upper guiding track - 1 lower guiding track - 1 cover to hide fixing screws (to be clipped on the lower track)
Technical drawings
Set of tracks – 2 m
Ref: 70/200B
Set of aluminium tracks, white painted (9016 RAL) - L = 2 m, including: 1 upper guiding track - 1 lower guiding track - 1 cover to hide fixing screws (to be clipped on the lower track).
View product
Technical drawings
Set of tracks – 2 m
Ref: 70/200A
Set of aluminium tracks, anodized aluminium - L = 2 m, including: 1 upper guiding track - 1 lower guiding track - 1 cover to hide fixing screws (to be clipped on the lower track).
View product
Technical drawings
Set of tracks – 3 m
Ref: 70/300A
Set of aluminium tracks, anodized aluminium - L = 3 m, including: 1 upper guiding track - 1 lower guiding track - 1 cover to hide fixing screws (to be clipped on the lower track).
View product
Technical drawings
Set of tracks – 3 m
Ref: 70/300B
Set of aluminium tracks, white painted (9016 RAL) - L = 3 m, including: 1 upper guiding track - 1 lower guiding track - 1 cover to hide fixing screws (to be clipped on the lower track).
View product
Technical drawings
Set of two end caps
Set SAF for 1 door weighing 10-20 kg
Ref: SAF10-80-195-1
Set for 1 door weighing 10-20 kg fixing to the wall:
- 1 track 13108, length 1,95 m ;
- 2 hangers 13218 (mounted on ball bearings) ;
- 2 plates 13036 ;
- 1 adjustable end stop 11213 ;
- 1 damper M65S ;
- 1 floor guide 1103R ;
- 5 angle brackets 13013 ;
- 1 Buly (bubble level).
Set SAF for 1 door weighing 21-60 kg
Ref: SAF10-80-195-2
Set for 1 door weighing 21-60 kg fixing to the wall:
- 1 track 13108, length 1,95 m ;
- 2 hangers 13218 (mounted on ball bearings) ;
- 2 plates 13036 ;
- 1 adjustable end stop 11213 ;
- 1 damper M66S ;
- 1 floor guide 1103R ;
- 5 angle brackets 13013 ;
- 1 Buly (bubble level).
Set SAF for 1 door weighing 61-80 kg
Ref: SAF10-80-300-3
Set for 1 door weighing 61-80 kg fixing to the wall:
- 1 track 13108, length 3 m ;
- 2 hangers 13218 (mounted on ball bearings) ;
- 2 plates 13036 ;
- 1 adjustable end stop 11213 ;
- 1 damper M67S ;
- 1 floor guide 1103R ;
- 7 angle brackets 13013 ;
- 1 Buly (bubble level).
Set SAF for 1 door weighing 81-120 kg
Ref: SAF81-120-300-4
Set for 1 door weighing 81-120 kg fixing to the wall:
- 1 track 13312, length 3 m ;
- 2 hangers 13232 (mounted on ball bearings) ;
- 2 plates 13036 ;
- 1 adjustable end stop 11213 ;
- 1 damper M68S ;
- 1 floor guide 1103R ;
- 10 angle brackets 13013 ;
- 1 Buly (bubble level).
Set SAF-BOIS for 1 door weighing up to 60 kg
Ref: SAFB60-185
Set SAF®-BOIS for 1 door weighing up to 60 kg:
- 1 raw aluminium track drilled, length of 1.85 m;
- 1 White coated MDF door jamb with a white seal;
- 2 white-coated MDF sticks;
- 1 white coated MDF pelmet (can be recut);
- 3 fastening brackets for pelmet;
- 2 rollers 13218 + 2 plates 13036;
- 2 adjustable end stops 11213;
- 1 floor guide 1103R;
- Spanner, screws and assembly instructions.
Installation instructions
Technical drawings
Set TANGO for 2 panels – Track 1,50 m
Ref: TANGO40A-150
Set for 2 panels including:
- 1 anodised aluminium track SAF drilled - L = 1.50 m;
- 1 SAF roller (ball bearings) with plate;
- 1 upper pivot;
- 1 lower pivot;
- 3 hinges 1504C3 (side fixing);
- Screws and mounting instructions.
Technical drawings
Set TANGO for 4 panels – Track 1,95 m
Ref: TANGO40A-195
Set for 4 panels including:
- 1 anodised aluminium track SAF drilled - L = 1.50 m;
- 2 SAF rollers (ball bearings) with plate;
- 2 upper pivots;
- 2 lower pivots;
- 6 hinges 1504C3 (side fixing);
- Screws and mounting instructions;
2 panels on each side of the opening (2 + 2).
Technical drawings
Shims
Ref: RD-7
Set of 4 shims to increase the distance between the wall and the track. Length: 10 mm.
View productShutter fastener
Ref: 1300
- Set includes: clevis with mounted hook, length = 463 mm max. - 2 adjustable latch catches - installation instructions. 4 blocking positions possible: closed, sunshade, half-open, open.
Technical drawings
Shutter fastener
Ref: 1300L
- Set includes: clevis with mounted hook, length = 578 mm max. - 2 adjustable latch catches - installation instructions. 4 blocking positions possible: closed, sunshade, half-open, open.
Technical drawings
Side fixing plate
Technical drawings
Side fixing plate
Technical drawings
Side fixing plate
Ref: 0021
- Side fixing plate with tapped hole Ø M8, Height = 40 mm, width = 40 mm, For panels thicker than 20 mm
Technical drawings
Side fixing plate
Technical drawings
Side fxing plate
Ref: 0023
Hanger. Length = 75 mm, width = 20 mm For panels of 16 mm and 19 mm thickness
View product
Technical drawings
Slide
Technical drawings
Slide – 2 m
Technical drawings
Slide – 2,63 m
Technical drawings
Slider
Technical drawings
Slider
Technical drawings
Softcloser for gentle closing of doors 10-20 kg
Ref: M65S
Softcloser for gentle closing of doors (100 mm).
Softcloser automatically follows door to its closed position.
Suitable for doors weighing 10 - 20 kg.
It is recommended that 2 softclosers be used for doors with a width of 830 mm or more.
Innovation MANTION: Damper for lightweight doors
View productSoftcloser for gentle closing of doors 120-200 kg
Ref: M70S
Damper closer system with soft/opening and closing with over 100mm soft closing travel distance.
For doors weighing 120 to 200 kg.
For soft closing in opening and closing, minimum width of 1550mm is needed.
Accompanied with one roller.
Innovation MANTION: Soft-closer M70S.
View product
Technical drawings
Softcloser for gentle closing of doors 21-60 kg
Ref: M66S
Softcloser for gentle closing of doors (100 mm).
Softcloser automatically follows door to its closed position.
Suitable for doors weighing 21 - 60 kg.
It is recommended that 2 softclosers be used for doors with a width of 830 mm or more.
Spring
Technical drawings
Spring
Technical drawings
Spring catch
Technical drawings
Square steel pillar
Technical drawings
Square steel pillar
Technical drawings
Square steel pillar
Technical drawings
Square steel pillar
Technical drawings
Square steel pillar
Technical drawings
Square steel pillar
Technical drawings
Square steel pillar
Technical drawings
Square steel pillar
Technical drawings
Square steel pillar
Technical drawings
Stainless steel link
Ref: W0000400
Stainless steel link for multiple panels to drag shutters along when motorizing swinging shutters. Min. and max. width of panels: min. = 400 mm, max. = 650 mm.
View product
Technical drawings
Stainless steel plate
Ref: 0036XM8
Stainless steel plate to screw into edge, diameter M8 - 100 x 25. Thickness : 25/10.
View product
Technical drawings
Stainless steel wheels
Ref: 20100R21X
- Stainless steel wheels Ø100 - Round groove wheel Ø21 - Capacity/wheel = 400 Kg
Technical drawings
Stainless steel wheels
Ref: 20120R21X
Stainless steel wheels Ø120 - Round groove wheel Ø21 - Capacity/wheel = 500 Kg
View product
Technical drawings
Standard plate
Technical drawings
Steel dish handle
Technical drawings
Steel handle
Steel handle
Steel handle
Steel pull handle
Ref: RD-10B
Flat, steel pull handle with a “black” finish. Height = 356 mm. Width = 32 mm
View product
Technical drawings
Steel wheel
Technical drawings
Stop
Stop
Technical drawings
Stop
Technical drawings
Stop
Technical drawings
Stop
Technical drawings
Stop
Ref: 2097V
Middle gate stop, screwing type Height : 40 mm - Width : 100 mm Length : 140 mm.
View product
Technical drawings
Stop
Technical drawings
Stop
Technical drawings
Stop
Technical drawings
Stop
Technical drawings
Stop
Technical drawings
Stop
Technical drawings
Stop
Ref: 1096
Double stop in cast iron for door closing in the centre - Adjsutable from 40 to 75 mm - sealing type
View product
Technical drawings
Stop
Technical drawings
Stop
Ref: 2090S
Middle gate stop, sealing type Height : 85 mm Width : 60 mm - Length : 100 mm.
View product
Technical drawings
Stop
Ref: 2097S
Middle gate stop, sealing type Height : 115 mm - Width : 100 mm Length: 160 mm.
View product
Technical drawings
Stop
Technical drawings
Stop
Technical drawings
Stop
Technical drawings
Stop
Technical drawings
Stop for swing shutters
Technical drawings
Stop for swing shutters
Technical drawings
Stop for swing shutters
Technical drawings
Stop-holder
Ref: 1310N
Brushed stainless steel stop-holder. Travel = 35 mm. Height = 140 mm. Width = 40 mm.
View product
Technical drawings
Stop-holder
Ref: 1311N
Brushed stainless steel stop-holder - travel = 35 mm - Height: 160 mm - Largeur: 30 mm.
View product
Technical drawings
Stop-holder
Ref: 1312N
Painted zamak stop-holder - travel = 20 mm - Height: 135 mm - Largeur: 50 mm
View product
Technical drawings
Stopper
Technical drawings
Stopper
Stopper – Doors up to 80 Kg
Stopper for doors up to 40 Kg
Supporting end wheel
Ref: 1050GA
- Supporting end wheel for track 10500 PAF comprising an axle, two spacers, two circlips and a wheel.
Technical drawings
Supporting end wheel
Ref: 1060GA
- Supporting end wheel for track 10600 PAF comprising an axle, two spacers, two circlips and a wheel.
Technical drawings
Switch
Technical drawings
Switch
Technical drawings
Switch
Technical drawings
Switch
Technical drawings
Switch
Technical drawings
Symetric mechanism
Ref: RD-8
The SYMETRIC mechanism allows the installation of aditional doors, and thus enables their symmetrical and simultaneous opening and closing. The advantage of the assembly is the extremely decorative combination of synchronously operating rollers.
Compatible onyl with type A and D rollers.
View productSynchronisation kit for 2 opposing 80 kg doors
Ref: SAF10-80SYN
Synchronisation kit for 2 opposing 80 kg doors, with an opening of up to 2.2 m, includes:
- 4 hangers 13218, with 4 plates 13036;
- 2 adjustable end stops 11213;
- 2 end stops 11213N;
- Synchronisation parts;
- 1 Buly (bubble level);
- 2 guides 1103R.
Track to be ordered separately.
Associated track: 13108.
View productSynchronization kit
Ref: 11050-2
Synchronization kit for 2 doors of 80 Kg:
- 2 assembled driving pulleys
- Driving angle plate
- Fixing angle plate with spring
- Cable of Ø 1.5 mm. Length 10 m.
Three-point lock set
Ref: GH10430KL
Three-point lock set with key (for gates) including:
- 1 three-point key lock;
- 1 bolt kit;
- 1 keeper kit.
Delivered without handle.
View product
Technical drawings
Timer on the left side
Ref: SC-TL
Timer on the left side: The door stays opened until 60 seconds before closing (adjustable).
View product
Technical drawings
Timer on the right side
Ref: SC-TR
Timer on the right side: The door stays opened until 60 seconds before closing (adjustable).
View product
Technical drawings
Top fixing plate
Ref: 0026
Top fixing plate with tapped hole Ø M8. Length: 75 mm - width: 20 mm. For panels over 20 mm thickness
View product
Technical drawings
TPE seal
Ref: GHEU30L
TPE seal, sold by the metre. To be fixed on the vertical frame. Seals against noise and dust.
View productTrack
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Ref: 5350/150
- Aluminium track: 22 x 14 mm, drilled to Ø 3.5, every 220 mm, length, 1.50 m, weight, 1.11 kg/m.
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Ref: 25/200B
- White PVC track, mortising type - length: 2m. For upper and lower guidance
Technical drawings
Track
Ref: 25/200M
- Brown PVC track, mortising type - length: 2m. For upper and lower guidance
Technical drawings
Track
Ref: 25/300B
- White PVC track, mortising type - length: 3 m. For upper and lower guidance
Technical drawings
Track
Ref: 25/300M
- Brown PVC track, mortising type - length: 3 m. For upper and lower guidance
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track
Technical drawings
Track – 2 m
Technical drawings
Track – 2 m
Ref: 11108/200
- Anodized aluminium track, 33 x 27 mm cross-section drilled every 0.44 m. Length = 2 m
Technical drawings
Track – 2 m
Track – 2 m
Technical drawings
Track – 2 m
Technical drawings
Track – 2,5 m
Ref: 7050P/250
Galvanized track: 2.50m long, thickness, 20/10, drilled every 0.50m with square holes, for square head screws, 6 x 6, height, 53 mm.
View product
Technical drawings
Track – 2.5 m
Ref: 11108/250
- Anodized aluminium track, 33 x 27 mm cross-section drilled every 0.44 m. Length = 2.5 m
Technical drawings
Track – 3 m
Technical drawings
Track – 3 m
Technical drawings
Track – 3 m
Technical drawings
Track – 3 m
Technical drawings
Track – 3 m
Ref: 6255/300
Galvanised steel track, 62 x 55 mm cross-section, thickness = 2.5 mm Length = 3 m.
View product
Technical drawings
Track – 3 m
Technical drawings
Track – 3 m
Ref: 11108/300
- Anodized aluminium track, 33 x 27 mm cross-section drilled every 0.44 m. Length = 3 m
Technical drawings
Track – 3m
Technical drawings
Track – 4 m
Track – 4 m
Ref: 9060/400
HERCULE galvanised steel track, 75 x 80 mm cross-section. Thickness = 4.5 mm. Length = 4 m.
View productTrack – 4 m
Track – 4 m
Technical drawings
Track – 4 m
Ref: 11108/400
Anodized aluminium track, 33 x 27 mm cross-section drilled every 0.44 m. Length = 4 m.
View product
Technical drawings
Track – 4 m
Ref: 11312/400
Anodized aluminium track, 37.4 x 28 mm cross-section drilled every 0.30 m, length = 4 m.
View productTrack – 5 m
Ref: 11312/500
- Anodized aluminium track, 37.4 x 28 mm cross-section drilled every 0.30 m, length = 5 m
Technical drawings
Track – 5 m
Ref: 11108/500
- Anodized aluminium track, 33 x 27 mm cross-section drilled every 0.44 m. Length = 5 m
Technical drawings
Track – 5 m
Ref: 2525F/500
Galvanized steel track: 27 x 24.5 mm, drilled and countersunk every 110 mm. Length = 5 m.
View product
Technical drawings
Track – 5 m
Ref: 25/500B
White PVC track, mortising type - length: 5m. For upper and lower guidance.
View product
Technical drawings
Track – 5 m
Ref: 25/500M
Brown PVC track, mortising type - length: 5m. For upper and lower guidance.
View product
Technical drawings
Track – 6 m
Ref: 2525F/600
Galvanized steel track: 27 x 24.5 mm, drilled and countersunk every 110 mm. Length = 6 m.
View product
Technical drawings
Track – 6 m
Ref: 11145/600
Anodized aluminium track, 32.1 x 26.4 mm cross-section drilled every 0.44 m. Length = 6 m.
View product
Technical drawings
Track – 6 m
Ref: 11108/600
- Anodized aluminium track, 33 x 27 mm cross-section drilled every 0.44 m. Length = 6 m
Technical drawings
Track – 6 m
Technical drawings
Track – L = 1.55 m
Ref: 2525F/155
Galvanized steel track: 27 x 24.5 mm, drilled and countersunk every 110 mm. Length = 1.55 m
View product
Technical drawings
Track – L = 1.85 m
Ref: 2525F/185
- Galvanized steel track: 27 x 24.5 mm, drilled and countersunk every 110 mm. Length = 1.85 m
Technical drawings
Track – L = 4 m
Ref: 2525F/400
- Galvanized steel track: 27 x 24.5 mm, drilled and countersunk every 110 mm. Length = 4 m
Technical drawings
Track connector
Ref: RD-9
Track connector. For joining two tracks together. Especially used with synchronisation kits (RD-8).
View product
Technical drawings
Trolley
Technical drawings
Trolley
Technical drawings
Trolley
Ref: 2432P
- Trolley with oscillating support - Nylon rollers on plain pin - cable 45x20 maxi - Capacity/trolley 25 kg - track : 3530
Technical drawings
Trolley
Ref: 2452P
- Trolley with oscillating support - Nylon rollers on plain pin - cable 70 x 20 maxi - capacity/trolley 50 kg - track 5040
Technical drawings
Trolley
Technical drawings
Trolley
Ref: 2433P
- Drive trolley with Nylon rollers on plain pin - cable 45x20 maxi - capacity/trolley25 kg - track : 3530
Technical drawings
Trolley
Ref: 2453P
- Drive trolley with Nylon rollers on plain pin - Capacity/trolley 50 kg - track : 5040
Technical drawings
Trolley
Technical drawings
Trolley
Technical drawings
Trolley
Technical drawings
Trolley
Technical drawings
Trolley
Ref: 0752
Trolley with 2 rollers - Car-directional Nylon roller carriages, fitted on rings bronzes self-lubricating and stainless plain pins. Capacity/trolley 40 kg - track 5040
View product
Technical drawings
Trolley
Technical drawings
Trolley
Ref: 2868S
- Double trolley entirely out of steel and precision ball bearings (perfil 6255 : load 300 kg)
Technical drawings
Trolley
Technical drawings
Trolley
Ref: 2888S
- Double trolley entirely out of steel and precision ball bearings (perfil : 8570 - Load 500 kg)
Technical drawings
Trolley
Ref: 0852
Trolley with 2 rollers - Car-directional Nylon roller carriages, fitted on rings bronzes self-lubricating and stainless plain pins. Capacity/trolley 40 kg - track 5040
View product
Technical drawings
Trolley
Ref: 2869
- Double trolley with ring made up with ball bearings moulded in Nylon + glass fiber - Load 250 kg - Profile 6255
Technical drawings
Trolley
Ref: 0731
- Trolley with 2 rollers - Delrin rollers and plain pin - Capacity/trolley 5 kg - track 3530
Technical drawings
Trolley
Ref: 2869S
- Double trolley with ring entirely out of steel and precision ball bearings - Load : 300 kg - Profile : 6255
Technical drawings
Trolley
Technical drawings
Trolley
Ref: 2889
- Double trolley with ring made up with ball bearings moulded in Nylon + glass fiber. Load 300 kg - Profile 8570
Technical drawings
Trolley
Ref: 0751
Trolley with 2 rollers - Car-directional Nylon roller carriages, fitted on rings bronzes self-lubricating and stainless plain pins. Capacity/trolley 20 kg - track 5040
View product
Technical drawings
Trolley
Technical drawings
Trolley
Ref: 2889S
- Double trolley with ring entirely out of steel and precision ball bearings. Load : 500 Kg - Profile : 8570
Technical drawings
Trolley
Ref: 0761
Trolley with 2 rollers - Car-directional Nylon roller carriages, fitted on rings bronzes self-lubricating and stainless plain pins. Capacity/trolley 40 kg - track 6255
View product
Technical drawings
Trolley
Ref: 2731
- Car-directional trolley, entirely out of steel and assembled on balls bearings. Capacity/trolley 5 kg - track 3530
Technical drawings
Trolley
Ref: 2751
- Car-directional trolley, entirely out of steel and assembled on balls bearings. Capacity/trolley 20 kg - track 5040
Technical drawings
Trolley
Ref: 0732
- Trolley with 2 rollers - Delrin rollers and plain pin - Capacity/trolley 10 kg - track 3530
Technical drawings
Trolley
Ref: 2761
Car-directional trolley, composed of ball bearings in moulded Nylon + glass fiber. Capacity/trolley 60 kg - track 6255
View product
Technical drawings
Trolley
Ref: 0762
- Trolley with 2 rollers - Car-directional Nylon roller carriages, fitted on rings bronzes self-lubricating and stainless plain pins. Capacity/trolley 80 kg - track 6255
Technical drawings
Trolley
Ref: 2761A
Car-directional trolley, entirely out of steel and assembled on balls bearings. Capacity/trolley 40 kg - track 6255
View product
Technical drawings
Trolley
Ref: 0782
- Trolley with 2 rollers - Car-directional Nylon roller carriages, fitted on rings bronzes self-lubricating and stainless plain pins. Load : 160 kg - Profile 8570
Technical drawings
Trolley
Ref: 2732
- Car-directional trolley, entirely out of steel and assembled on balls bearings - capacity/trolley 25 kg - track 3530
Technical drawings
Trolley
Ref: 2752
Car-directional trolley, entirely out of steel and assembled on balls bearings - capacity/trolley 60 kg - track 5040.
View product
Technical drawings
Trolley
Ref: 2762
- Car-directional trolley composed of ball bearings in moulded Nylon + glass fiber - capacity/trolley 125kg - track 6255
Technical drawings
Trolley
Ref: 2762A
- Car-directional trolley, entirely out of steel and assembled on balls bearings-capacity/trolley 150 kg - track 6255
Technical drawings
Trolley
Ref: 2782
- Car-directional trolley composed of ball bearings in moulded Nylon + glass fiber (Profile 8570 : load 250 kg)
Technical drawings
Trolley
Ref: 2782A
- Car-directional trolley, entirely out of steel and assembled on balls bearings ( Profile 8570 : load 300 Kg)
Technical drawings
Trolley
Ref: 0832
Trolley with 2 rollers - Delrin rollers and plain pin - capacity/trolley 10 kg. Track 3530.
View product
Technical drawings
Trolley
Ref: 0862
Trolley with 2 rollers - Car-directional Nylon roller carriages, fitted on rings bronzes self-lubricating and stainless plain pins. Capacity/trolley 80 kg - track 6255
View product
Technical drawings
Trolley
Ref: 0882
Trolley with 2 rollers - Car-directional Nylon roller carriages, fitted on rings bronzes self-lubricating and stainless plain pins. Load 160 kg - Profile 8570
View product
Technical drawings
Trolley
Ref: 2832
Car-directional trolley, entirely out of steel and assembled on balls bearings. Capacity/trolley 25 kg. Track 3530.
View product
Technical drawings
Trolley
Ref: 2852
Car-directional trolley, entirely out of steel and assembled on balls bearings. Capacity/trolley 60 kg - track 5040
View product
Technical drawings
Trolley
Ref: 2862
Car-directional trolley composed of ball bearings in moulded Nylon + glass fiber. Capacity/trolley 125 kg - track 6255
View product
Technical drawings
Trolley
Ref: 2862A
Car-directional trolley, entirely out of steel and assembled on balls bearings - Capacity/trolley 150 kg - track 6255
View product
Technical drawings
Trolley
Ref: 2882
Car-directional trolley composed of ball bearings in moulded Nylon + glass fiber. Load : 250 kg - Profile : 8570
View product
Technical drawings
Trolley
Ref: 2882A
Car-directional trolley, entirely out of steel and assembled on balls bearings. Load : 300 kg - Profile 8570
View product
Technical drawings
Trolley
Ref: 2882S
Car-directional trolley, entirely out of steel and assembled on balls bearings. Load : 400 kg - Profile 8570
View product
Technical drawings
Trolley
Technical drawings
Trolley
Ref: 2432R
- Trolley with oscillating support on ball bearings rollers for cable Ø 10 to 25 maxi - capacity/trolley 15 kg - track 3530
Technical drawings
Trolley
Ref: 2452R
- Trolley with oscillating support on ball bearings rollers for cable Ø 10 to 25 maxi - capacity/trolley : 20 kg - track 5040
Technical drawings
Trolley
Ref: 2433R
Drive trolley with ball bearings rollers for cable Ø 10 to 25 maxi - capacity/trolley 15 kg - track 3530
View product
Technical drawings
Trolley
Technical drawings
Trolley
Ref: 2453R
- Drive trolley with ball bearings rollers for cable Ø 10 to 25 maxi - capacity/trolley 20 kg - track 5040
Technical drawings
Trolley
Technical drawings
Trolley
Technical drawings
Trolley
Technical drawings
Tubular seal – 10 m
Ref: 66JC5/10
Tubular seal, 5 mm in diameter, made of silicone with a pine base. For 5 x 3 mm groove. Length = 10 m.
View productTubular seal – 2.5 m
Ref: 66JC5/250
Tubular gasket, 5 mm diameter, made of silicone with fir base. For 5 x 3 mm groove. Length 2.50 m.
View productTwo-point bolt lock set
Ref: GH10430BO
Two-point bolt lock set (for intermediate panels) including:
- 1 two-point bolt lock
- 1 handle (square-shaped, 7 mm)
- 1 bolt kit
- 1 keeper kit
Technical drawings
Two-point bolt lock set
Ref: GH10430BO-01
Two-point bolt lock set (for configurations with an odd number of panels on each side) including:
- 1 two-point bolt lock
- 1 handle (square-shaped, 7 mm)
- 1 bolt kit
- 1 keeper kit
Technical drawings
U-Plate
Technical drawings
U-Plate
Technical drawings
U-plate
Technical drawings
U-profile
Ref: 1106/110
Black PVC U-profile, 12x17, to be flush-mounted under the door. Improves door sliding performance. Suitable for guides 1103 and 1103R. Length: 1.10 m.
View productU-profile
Technical drawings
U-profile
U-profile – 3 m
U-profile – 4 m
Technical drawings
U-profile – 4 m
Technical drawings
U-profile – 5 m
Technical drawings
U-profile – 5 m
Technical drawings
U-profile – 6 m
Technical drawings
U-profile – 6 m
Technical drawings
U-profile – 6 m
Technical drawings
U-profile – 6 m
Technical drawings
U-profile – L = 3 m
Technical drawings
Upper guiding wheel
Wall fixing angle plate
Ref: 9046CFC
Wall fixing angle plate. Adjustable from 35 to 60 mm. For M12.5 screw and for tracks 9030 and 9040.
View product
Technical drawings
Wall fixing angle plate
Ref: 9046CF
- Wall fixing angle plate. Adjustable from 32 to 110 mm. For M12.5 screw and for tracks 9030 and 9040.
Technical drawings
Wall fixing angle plate
Ref: 9046CFL
- Wall fixing angle plate. Adjustable from 35 to 130 mm. For M12.5 screw and for tracks 9030 and 9040.
Technical drawings
Wall fixing angle plate
Ref: 9076
- Wall fixing angle plate. Adjustable from 45 to 85 mm. For M21 screw and for track 9070
Technical drawings
Wall fixing angle plate
Ref: 9066
Wall fixing angle plate. Adjustable from 33 to 90 mm. For M20 screw and for track 9060.
View product
Technical drawings
Wall fixing angle plate
Ref: 9066L
Wall fixing angle plate. Adjustable from 33 to 150 mm. For M20 screw and for track 9060.
View product
Technical drawings
Wall fixing angle plate
Ref: 9056CFC
Wall fixing angle plate. Adjustable from 40 to 65 mm. For M16.5 screw and for track 9050.
View product
Technical drawings
Wall fixing angle plate
Ref: 9056CF
Wall fixing angle plate. Adjustable from 30 to 105 mm. For M16.5 screw and for track 9050.
View product
Technical drawings
Wall fixing angle plate
Ref: 9056CFL
Wall fixing angle plate. Adjustable from 30 to 135 mm. For M16.5 screw and for track 9050.
View product
Technical drawings
Welding jig
Technical drawings
Welding jig
Technical drawings
Welding jig
Technical drawings
Wheel
Ref: 21081V20
- Steel wheels with external mounting brackets - Steel Wheel Ø 80 - "V" groove 20 mm width - Capacity/wheel: 200 kg
Technical drawings
Wheel
Ref: 21101V20
- Steel wheels with external mounting brackets - Steel Wheel Ø 100 - "V" groove 20 mm width - Capacity/wheel: 200 kg
Technical drawings
Wheel
Ref: 21100V20
- Steel wheels with external mounting brackets - Steel Wheel Ø 100 - "V" groove 21 mm width - Capacity/wheel: 400 kg
Technical drawings
Wheel with stainless steel internal plates
Ref: 22100R21X
Wheel with stainless steel internal plates - Stainless steel wheels Ø100 - Round groove wheel Ø21 - Capacity/wheel = 400 Kg
View product
Technical drawings
Wheel with stainless steel internal plates
Ref: 22120R21X
Wheel with stainless steel internal plates - Stainless steel wheels Ø120 - Round groove wheel Ø21 - Capacity/wheel = 500 Kg
View product
Technical drawings
Wired or radio-controlled motorisation for single 730 x 2040 mm timber door (without a switch)
Ref: SAF-INSIDE70M
Motorised cassette kit for single timber pocket door - 730 X 2040 door. Capacity/door: up to 80 kg. Thickness: up to 40 mm. See sales brochure.
View product
Technical drawings
Wired or radio-controlled motorisation for single 830 x 2040 mm timber door (without a switch)
Ref: SAF-INSIDE80M
Motorised cassette kit for single timber pocket door - 830 X 2040 door. Capacity/door: up to 80 kg. Thickness: up to 40 mm. See sales brochure.
View product
Technical drawings
Wired or radio-controlled motorisation for single 930 x 2040 mm timber door (without a switch)
Ref: SAF-INSIDE90M
Motorised cassette kit for single timber pocket door - 930 X 2040 door. Capacity/door: up to 80 kg. Thickness: up to 40 mm. See sales brochure.
View product
Technical drawings
Wooden frame kit
Ref: SFOLD-F
Wooden door frame kit (finger-jointed limewood), predrilled and pre-routedfor easy installation and a neat finish. Compatible with openings up to 1500 mm wide and up to 2116 mm high.
View product