CADETTE

Hanger CADETTE mounted on a RILSAN ring, supplied with plates 0026 et 0021

• Side fixing plate with tapped hole Ø M8, Height = 40 mm, width = 40 mm, For panels thicker than 20 mm

Top fixing plate with tapped hole Ø M8. Length: 75 mm - width: 20 mm. For panels over 20 mm thickness

Hanger. Length = 75 mm, width = 20 mm For panels of 16 mm and 19 mm thickness

Mortising plate for roller fixing.

• End stop for track 2525.

• Wall-fixing bracket for twinned tracks 2525 supplied with screws, nuts and washers.
  Height: 34 mm - Length: 47 mm - Thickness: 30/10e

• Reinforced angle plate for wall fixing of track (MA80A), supplied with screws, nuts and washer. Height = 23 mm - Length = 30 mm - Thickness = 30/10

Wall angle bracket for track 2525, screws, nuts and washers. Height : 23 mm. Length : 30 mm. Thickness : 30/10. Set of five.

Galvanized steel track: 27 x 24.5 mm, drilled and countersunk every 110 mm. Length = 1.55 m

• Galvanized steel track: 27 x 24.5 mm, drilled and countersunk every 110 mm. Length = 1.85 m

• Galvanized steel track: 27 x 24.5 mm, drilled and countersunk every 110 mm. Length = 4 m

Galvanized steel track: 27 x 24.5 mm, drilled and countersunk every 110 mm. Length = 5 m.

Galvanized steel track: 27 x 24.5 mm, drilled and countersunk every 110 mm. Length = 6 m.

Raw aluminium track, 26 x 25 mm, drilled and countersunk every 110 mm in length of 1.85 m.

Galvanised steel track, 27 x 24.5 mm, thickness = 1.5 mm, drilled and countersunk every 110 mm. Length = 2 m.

Galvanised steel track, 27 x 24.5 mm, thickness = 1.5 mm, drilled and countersunk every 110 mm. Length = 3 m.