Our stoppers and interlockings

Catch stop.

• Raw (black) catch stop, with a door latch, screwing type, heavy-duty series

• Nickel-plated brushed metal latch with strike plate, to be mounted on the jamb of the opening. Travel = 18 mm

• Reinforced cane bolt. Screwing type. Length : 300 mm, Ø 14.

Reinforced bolt with screwing type. Length = 300 mm - Ø 14 mm - adjustable nut

• Keeper of bolt for 1314 and 1314 SO. Inlet type.

• Keeper of bolt for 1314 and 1314SO.

Cane bolt to weld, welding type - Length : 300 mm - Ø 14 mm.

• Reinforced cane bolt, screwing type - Height : 500 mm - Ø 16 mm

• Bolt with PORTE CADENAS, BOITIER EN FONTE, Cane and keeper in steel. Weight : 660 gr. - Ø 16 mm

• Reinforced bolt with screwing type (23 mm). Length = 500 mm - Ø 16 mm - adjustable nut

• Keeper of bolt for 1316 et 1316 SO. Inlet type.

• Keeper of bolt for 1316 and 1316 SO.

Cane bolt - welding type - Length : 500 mm - Ø 16 mm.

Tilting gate stop, adjustable cataphoresis protection, sealing type Spacing : 40-70 mm Height : 50 mm Width : 40 mm - Length : 150 mm.

Tilting gate stop, adjustable in dichromated steel, screwing type Spacing : 40-70 mm Height : 120 mm Width : 40 mm - Length : 145 mm.

Brushed stainless steel stop-holder. Travel = 35 mm. Height = 140 mm. Width = 40 mm.

Brushed stainless steel stop-holder - travel = 35 mm - Height: 160 mm - Largeur: 30 mm.

Painted zamak stop-holder - travel = 20 mm - Height: 135 mm - Largeur: 50 mm

• Fixing kit for keeper 1314E and 1316E

Two-point bolt lock set for Opentech FMF150.

Nickled plate stop - For small wooden or metal door. Height : 128 mm

Nickled plate stop - For small wooden or metal door. Height : 190 mm

Locking system to hold a sliding shutter/shade screen in any position. Simply pull and hold the cable to release the shutter/screen. Then release the cable to hold the shutter/screen in place again. Stainless steel 2-metre-long sheathed cable.

Keeper for slide bolts 1317A, 1326A and 1351A.

Catch stop.

Two-point bolt lock set (for intermediate panels) including:
- 1 two-point bolt lock
- 1 handle (square-shaped, 7 mm)
- 1 bolt kit
- 1 keeper kit

Two-point bolt lock set (for configurations with an odd number of panels on each side) including:
- 1 two-point bolt lock
- 1 handle (square-shaped, 7 mm)
- 1 bolt kit
- 1 keeper kit

Kit with two bolt-type stainless steel rods. For panels under 3 m high.

Kit with two bolt-type stainless steel rods. For panels over 3 m high.