911A

52 SUGGESTIONS 0.70 m 1 stop in the middle part 1 stop in the upper part 1 stop in the lower part 1 stop in the upper part 1 stop in the lower part 2 hangers max BRACKETS: To be placed approx. each 0.70 m STOPS: 1 point: to be placed at mid-height of the door 2 points: 1 stop at the upper part and 1 at the lower part. Other stop fixing positions are not recom- -mended. INSTALLATION AND MAINTENANCE: Before the use of the doors, it is recommended to clean the inside of the tracks correctly and to grease them with bodied oil. To avoid any faulty sliding of the door, it is necessary to grease the inside of the tracks at least every 6 months. POSITION OF THE HANGERS: In order to improve the stability of the straight sliding doors, the bigger the ratio height/width is, the closer to the door you should fix the hangers. L 0.2 x L maxi 0.2 x L maxi ASSEMBLY POSSIBILITIES OF THE CURVE SECTORS: Curve sector Radius Track Item Nr 9010 9010 CS 500 9030 9030 CS 600 9040 9040 CS 600 9050 9050 CS 600 9060 9060 CS 800 20 ° For lateral displacement doors with wide panels. This ensures a good seal for lateral displacement doors equipped with a service door. Also for overhead conveyors with small deviations. MANTION