HERCULE® CANTILEVER GATES DIMENSIONS OF THE CONCRETE BLOCK: SAVE TIME !!! SIZE YOUR GATE TO SUITE YOUR SETUP WITH OUR SLIDESOFT® CALCULATION SOFTWARE ON: www.mantion.com technical video 6 B C L C P DESCRIPTION: There is no track on the ground. The tubular track is either welded or screwed to the gate. The gate slides on two carriages, which are fixed on a concrete block located on the push back side. According to the opening position of the gate, the carriages are in contact with either the upper or the lower part of the track to ensure a perfect balance. The wheels are in constant contact with the top and the bottom of the track limiting the clearance to a minimum (PAF series). PAF series carriages are strongly recommanded for motorized gates. AVANTAGES: • No track on the ground. • No concrete tie-beam is required to install or support the track. • The only construction work consists in the concrete block. • No risk of wear or deformation of the track due to the passage of lorries. • No risk of ground deformation due to the weather changes. • No obstruction of the track trough dust, gravel, stone chips ... • The gate can be installed on a non-stabilized ground (grass, gravel, mould...). • The ground need not be perfectly horizontal (in the opening). Length = shaft center distance B + 1 m (50 cm on each side) Width = 50 cm Depth = 80 cm
RkJQdWJsaXNoZXIy ODAxNzY=