SLIDING www.mantion.com 37 single channel - 1 leaf wall and ceiling mounting 120 double channel - 2 telescopic leaves wall mounting 80 x 2 double channel - 3 telescopic leaves wall mounting 66x2 66 double channel - 4 telescopic leaves wall mounting 50x2 50x2 single channel - 2 symmetrical leaves wall and ceiling mounting 100 100 maximum leaf weight depending on configuration SYCOMM MOTOR WITH BATTERY PACK - 230V POWER SUPPLY W0002530 Drive kit (230V power supply) with wireless control, includes: - 1 SYCOMM motor (onboard electronics) with position-holding brake* - 1 battery pack (in case of power outages) - 2-year warranty - 1 cable harness to connect the motor to the battery - 1 wireless remote control C0004770 W0002630 Ditto with SYCOMM motor without position-holding brake* W0002520 Drive kit (230V power supply) with wired control, includes: - 1 SYCOMM motor (onboard electronics) with position-holding brake* - 1 battery pack (in case of power outages) - 2-year warranty - 1 cable harness to connect the motor to the battery - 1 wired switch C0001050 W0002620 Ditto with SYCOMM motor without position-holding brake** W002530 W002630 W002520 W002620 C0001050 C0004770 PACK BATTERIE + + = = + * Sycomm with position-holding brake: shutter is held in position: Holding force ~30 kg ** Sycomm without position-holding brake: the system is reversible. Operation possible by applying a force < 5 kg SYCOMM MOTOR - 230V POWER SUPPLY W0002510 Drive kit (230V power supply) with wireless control, includes: - 1 SYCOMM motor (onboard electronics) with position-holding brake* - 1 wireless remote control C0004770 W0002610 Ditto with SYCOMM motor without position-holding brake** W0002500 Drive kit (230V power supply) with wired control, includes: - 1 SYCOMM motor (onboard electronics) with position-holding brake* - 1 wired switch C0001050 W0002600 Ditto with SYCOMM motor without position-holding brake** W002510 W002610 W002500 W002600 C0001050 C0004770 Motor SYCOMM Motor SYCOMM + = = + SYCOMM MOTOR BATTERY PACK GENERAL DATA: Soft start and stop – Obstacle detection Complies with CE requirements as per: EN60335-1:2013; EN60335-2-103:2004+A11:2009; NFP26341 EN61000-6-1:2007; EN61000-6-2:2006; EN61000-6-3:2007; EN61000-6-4:2007; NF 26-341 Complies with the European Directives: 2006/95/EC; 2006/42/EC; 2004/108/EC; 1999/5/EC; 2002/95/EC Note: All the data in the tables are provided for guidance only and are subject to variation according to the particular conditions of use. They are therefore not binding upon Mantion. Drive system designed for domestic use and mounting under a pelmet. Supply voltage 110-230 V AC - 50/60 Hz Max. power 25W Dimensions (L x W x H) 150x50x73 mm Degree of protection IP55 Type of limit switch Dynamic (stops on obstacle detection) Motor technology Brushless Linear velocity ~ 60mm/s Operating temperature -20 à +60°C Radio frequency 433.92MHz Length of mains cable 3m Voltage 12V Capacity 3000mA Type Lithium iron phosphate - LifePO4 Possible configurations:
RkJQdWJsaXNoZXIy ODAxNzY=