www.mantion.com 36 Motorisation Motorisation for sliding shutters 25 - 80 mm Motorized TRACK & PELMET - CEILING MOUNTING TRACK 11208P/600* Raw aluminium track, section 39 x 36 mm, drilled every 450 mm. Length = 6 m. PELMET & BRACKETS - single channel - 80 and 120 Kg 11261/...* Raw aluminium pelmet. Length = 2 / 3 and 6 m. 11294A Set of 5 anodised aluminium mounting brackets. For fixing the pelmet 11261. Supplied with A4 stainless steel fasteners. Fastened every 450 mm. *other lengths available on request TRACK & PELMETS - WALL MOUNTING TRACK 11208/...* Raw aluminium track, section 39 x 36 mm. Length = 2 / 3 and 6 m. PELMET & BRACKETS - 1 channel - 80 Kg 11293 Single adjustable fixing bracket in raw aluminium. Supplied with A2 stainless steel fasteners. Fastened every 660 mm at most. 11263L/...* Raw aluminium pelmet. Length = 2 / 3 and 6 m. 11266M Set of pelmet end caps 11263L, including: 2 raw aluminium end caps, 2 pelmet fastening clamps, 1 bracket for the end cap on the motor side, 8 A4 stainless steel fastening screws. PELMET & BRACKETS - double channel - 80 Kg & single channel - 120 Kg 11293D Double adjustable fixing bracket in anodised aluminium. Supplied with A2 stainless steel fasteners. Fastened every 660 mm at most (double channel - 80 Kg) Fastened every 450 mm at most (single channel - 120 Kg) 11264L/...* Raw aluminium pelmet. Length = 2 / 3 and 6 m. 11267M Set of pelmet end caps 11264L, including: 2 raw aluminium end caps, 2 pelmet fastening clamps, 1 bracket for the end cap on the motor side, 8 A4 stainless steel fastening screws. ACCESSOIRES 11269 Set of 5 additional clamps in anodised aluminium for fixing the pelmet to the brackets. For use when the pelmet is longer than 3 m. (in addition to the two clamps already supplied in the end cap kit). *other lengths available on request MOTORIZATION ACCESSORIES 11286XA2-SYN Track stop with integrated return pulley. 10190 Offset return pulley. 11291 A2 stainless steel joining bracket. 10192 A2 stainless steel driving bracket. 10171 A2 stainless steel fixed point assembly. 10172/... Reinforced cog belt. Length = 2.5 / 5 / 7.5 / 10 / 15 / 25 and 50 m. K0001170 Spare battery pack (consumable item). 2-year warranty. C0012620 2.2 m cable harness extension for motor/battery. 2 extensions can be added to the standard kit for a total length of 6.6 m. C0004780 433.92 MHz wireless RF switch, white. ROLLERS - PLATES - TRACK STOPS ROLLERS 11280LXA2 Roller mounted on ball bearings, A2 stainless steel M8 screw (93 mm). max. weight 80 kg/panel. 11282LXA4 Roller mounted on ball bearings, A4 stainless steel M8 screw (93 mm). max. weight 120 kg/panel. PLATE 0026XA2 A2 stainless steel plate to be screwed on edge. Leaf thickness: 25 mm min. For leaves up to 80 Kg. 0026XA4 A4 stainless steel plate to be screwed on edge. For leaves up to 120 Kg. TRACK STOP 11286XA2 Track stop with two anchoring points. Supplied with A2 stainless steel fasteners. Configurator QUOTE ONLINE Components list:
RkJQdWJsaXNoZXIy ODAxNzY=