www.mantion.com 26 Telescopic sliding Telescopic Wall mounting - double channel - 2 leaves Components list: TRACK & MOUNTING 11208/...* Raw aluminium track, section 39 x 36 mm. Length = 2 / 3 and 6 m. 11293D Adjustable fixing bracket in raw aluminium. Supplied with A2 stainless steel fasteners. Fastened every 660 mm at most. *other lengths available on request ROLLER - PLATES - TRACK STOPS ROLLER 11280LXA2 Roller mounted on ball bearings, A2 stainless steel M8 screw (93 mm). max. weight 80 kg/panel. PLATE 0026XA2 A2 stainless steel plate to be screwed on edge. Leaf thickness: 25 mm min. TRACK STOPS 11286XA2 Track stop with two anchoring points. Supplied with A2 stainless steel fasteners. 11287XA2 Track stop with two anchoring points. The clamp holds the panel in the open or closed position. Supplied with A2 stainless steel fasteners. PELMET & END CAPS 11264L/...* Raw aluminium pelmet. Length = 2 / 3 and 6 m. 11267L Set of pelmet end caps 11264L, including: 2 raw aluminium end caps, 2 pelmet fastening clamps, 8 A4 stainless steel fastening screws. 11269 Set of 5 additional clamps in anodised aluminium for fixing the pelmet to the brackets. For use when the pelmet is longer than 3 m. (in addition to the two clamps already supplied in the end cap kit). *other lengths available on request SYNCHRONISATION 10190 Offset return pulley. 10192 A2 stainless steel driving bracket. 10171 A2 stainless steel fixed point assembly. 10172/... Reinforced cog belt. Length = 2.5 / 5 / 7.5 / 10 / 15 / 25 and 50 m. LOWER GUIDE U-PROFILE 1109/... 25x17 zinc-plated steel U-profile. Length = 2 / 3 / 4 / 5 and 6 m. GUIDES 1131XRG Simple plastic slider on A2 stainless steel tiltable plate. For U-profiles 14 to 30 mm (1109). 1131DXRG Double plastic slider on A2 stainless steel tiltable plate. For U-profiles 14 to 30 mm (1109). 1128 Adjustable guide with 2 flexible-coated guide rollers, A2 stainless steel bracket. For U-profile 1109 (25 x 17 mm). 1128DRG Double plastic slider on A2 stainless steel bracket. For U-profiles 14 to 30 mm (1109). Other U-profile and guides available p.44-46 Configuration: Track Brackets Rollers Plates Track stops Pelmet + end caps 11208 11293D 11280LXA2 0026XA2 11286XA2 + 11287XA2 11264L + 11267L Synchronisation Lower guide Mantion® recommendation (see below) 10190 + 10192 + 10171 + 10172 + 25 - 40 mm
RkJQdWJsaXNoZXIy ODAxNzY=