www.mantion.com 18 Wall mounting - single channel - 2 leaves Symmetrical sliding Symmetrical 25 - 40 mm MANUAL configuration: Track Brackets Rollers Plates Track stops and soft-closer (your choice) Pelmet + end caps Lower guide Your choice (see below) 11208 11293 11280XA2 0026XA2 11286XA2 and/or 11287XA2 and/or 11288M15 11263 + 11266 Components list: TRACK & MOUNTING 11208/...* Raw aluminium track, section 39 x 36 mm. Length = 2 / 3 and 6 m. 11293 Adjustable fixing bracket in raw aluminium. Supplied with A2 stainless steel fasteners. Fastened every 660 mm at most. *other lengths available on request ROLLER - PLATES - TRACK STOPS ROLLER 11280XA2 Roller mounted on ball bearings, A2 stainless steel M8 screw (59 mm). max. weight 80 kg/panel. PLATE 0026XA2 A2 stainless steel plate to be screwed on edge. Leaf thickness: 25 mm min. TRACK STOPS 11286XA2 Track stop with two anchoring points. Supplied with A2 stainless steel fasteners. 11287XA2 Track stop with two anchoring points. The clamp holds the panel in the open or closed position. Supplied with A2 stainless steel fasteners. PELMET & END CAPS 11263/...* Raw aluminium pelmet. Length = 2 / 3 and 6 m. 11266 Set of pelmet end caps 11263, including: 2 raw aluminium end caps, 2 pelmet fastening clamps, 8 A4 stainless steel fastening screws. 11269 Set of 5 additional clamps in anodised aluminium for fixing the pelmet to the brackets. For use when the pelmet is longer than 3 m. (in addition to the two clamps already supplied in the end cap kit). *other lengths available on request SOFT-CLOSER 11288M15 Soft-closer for softly opening and/or closing doors. Suitable for doors weighing 20-60 kg. - 1 damper: min. width of door: 590 mm - 2 dampers: min. width of door: 860 mm LOWER GUIDE U-PROFILES 1109/... 25x17 zinc-plated steel U-profile. Length = 2 / 3 / 4 / 5 and 6 m. 11109/... 20x24 anodised aluminium U-profile (14 on inside). Length = 3 and 6 m. Profiles are available in raw aluminium (to paint) upon request. GUIDES 1131XRG Simple plastic slider on A2 stainless steel tiltable plate. For U-profiles 14 to 30 mm (1109 and 11109). 1128 Adjustable guide with 2 flexible-coated guide rollers, A2 stainless steel bracket. For U-profiles 1109 (25 x 17 mm) and 11109 (20 x 24 mm). 1112/2 Adjustable guide with 2 nylon guide rollers on A2 stainless steel plate. For U-profiles 1109 (25 x 17 mm) and 11109 (20 x 24 mm). 1103RG Plastic adjustable slider (14 to 30 mm) with screw and S6 dowel. For U-profiles 14 to 30 mm (1109 and 11109). Other U-profile and guides available p.44-46 20-60 Kg
RkJQdWJsaXNoZXIy ODAxNzY=