MANTION® Installation instructions are available to download on int.mantion.com 10 SETS for sliding shutters OPTIONS: PELMETS - END CAPS - ACCESSORIES 11263/200 Raw aluminium pelmet. L = 2 m. 11266 Set of pelmet end caps 11263, including: 2 raw aluminium end caps, 2 pelmet fastening clamps, 8 A4 stainless steel screws. 11295 Set of 5 A2 stainless steel suspensions. Manual configuration with ceiling mounting: for fastening the pelmet (not supplied by MANTION) Motorised configuration with ceiling mounting: for installing the motor and fastening the pelmet (not supplied by MANTION). 11269 Set of 5 anodised aluminium clamps for fastening pelmets onto brackets. 11295 11269 11266 11263/200 WSLIDE-2RGV1 set SET FOR 1 LEAF UP TO 80 KG WALL MOUNTING, MANUAL OPERATION FOR OPENINGS UP TO 900 MM WIDE Item no. Description WSLIDE-2RGV1 Set for 1 leaf up to 80 kg max.: - 1 track 11208. L = 2 m - 2 hangers 11280XA2 equipped with 4 rollers, pins mounted roller bearings, A2 stainless steel M8 screws - 2 A2 stainless steel plates 0026XA2 to be screwed on edge - 2 end stops 11286XA2 with A2 stainless steel fasteners - 4 raw aluminium adjustable mounting brackets 11293, , with A2 stainless steel fasteners - 1 white plastic adjustable guide 1128ARG, for 25x17 and 30X30 U-profiles, on electrocoated steel bracket + white polyester paint RAL 9010 - 2 white plastic adjustable guides 1131XRG for 25x17 and 30x30 U-profiles on A2 stainless steel tiltable plate - 1 25x17 zinc-plated steel U-profile 1109/150. L = 1.5 m 11280XA2 x2 0026XA2 x2 11286XA2 x2 11293 x4 1128ARG x1 1131XRG x2 11208/200 x1 1109/150 x1 SET FOR 2 LEAVES SLIDING IN OPPOSITE DIRECTIONS UP TO 80 KG WALL MOUNTING, MANUAL, NON-SYNCHRONISED OPERATION FOR OPENINGS UP TO 1900 MM WIDE Item no. Description WSLIDE-2RGV2 Set for 2 leaves up to 80 kg max.: - 2 tracks 11208. L = 2 m - 4 hangers 11280XA2 equipped with 4 rollers, pins mounted on roller bearings, A2 stainless steel M8 screws - 4 A2 stainless steel plates 0026XA2 to be screwed on edge - 4 11286XA2 end stops with A2 stainless steel fasteners - 8 raw aluminium adjustable mounting brackets 11293, with A2 stainless steel fasteners - 1 stainless steel track connector - 2 white plastic adjustable guides 1128ARG for 25x17 and 30X30 U-profiles, on electrocoated steel bracket + white polyester paint RAL 9010 - 3 white plastic adjustable guides 1131XRG for 25x17 and 30x30 U-profiles on A2 stainless steel tiltable plate - 2 2517 zinc-plated steel U-profiles 1109/150. L = 1.5 m 11280XA2 x4 0026XA2 x4 Track connector x1 11286XA2 x4 11293 x8 1128ARG x2 11208/200 x2 1131XRG x3 WSLIDE-2RGV2 set 1109/150 x2 CAPACITY PER PANEL 80 kg PANEL THICKNESS 25-40 mm PANEL TYPES wood, aluminium, PVC, etc. TRACK ANODISED ALUMINIUM MOVEMENT STRAIGHT Design by METALLERIE GUETTARD
RkJQdWJsaXNoZXIy ODAxNzY=