56 SPORTUB ® TRACKS & PROFILES TUBULAR TRACKS Item Nr Description Pack. 2525F/400 2525 F Galvanised track, drilled and countersunk every 0.44 m, 26 x 25 mm section, 4 m long 4 2525F/500 Ditto - 5 m long 4 2525F/600 Ditto - 6 m long 4 3530/400 3530 Galvanised track 35 x 30 mm - 4 m long 4 3530/500 Ditto - 5 m long 4 3530/600 Ditto - 6 m long 4 5040/400 5040 Galvanised track 50 x 40 mm - 4 m long 5040/500 Ditto - 5 m long 5040/600 Ditto - 6 m long 6255/400 6255 Galvanised track 62 x 55 mm, in 25/10e - 4 m long 6255/500 Ditto - 5 m long. 6255/600 Ditto - 6 m long 6255/600GE 6255GE Galvanised track 62 x 55 mm, in 20/10e - 6 m long 8570/400 8570 Galvanised track (High Limit of Elasticity steel) 85 x 70 mm - 4 m long 8570/500 Ditto - 5 m length. 8570/600 Ditto - 6 m length. CURVES FOR TUBULAR TRACK 3530C Curve for galvanised track 35 x 30 mm, Radius = 500 mm. 1 5040C Curve for galvanised track50 x 40 mm, Radius = 600 mm. 1 6255C Curve for galvanised track 62 x 55 mm, Radius = 800 mm. 1 8570C Curve for galvanised track 85 x 70 mm, Radius = 1000 mm. 1 GUIDING PROFILES 1109/400 1109 Galvanised U profile 25 x 17 mm- 4 m long. 4 1109/500 Ditto - 5 m long. 4 1109/600 Ditto - 6 m long. 4 1110/400 1110 Galvanised U profile 30 x 30 mm - 4 m long. 4 1110/500 Ditto - 5 m long. 4 1110/600 Ditto - 6 m long. 4 1115/600 1115 Galvanised U profile 50 x 60 mm - 6 m long. GUIDING CURVES 1109C Galvanised curve for U profile 25 x 17 mm, Radius = 500 mm. 1111C Galvanised curve for U profile 30 x 30 mm, Radius = 600 mm. 1112C galvanised curve for U profile 30 x 30 mm, Radius = 800 mm. 1113C Galvanised curve for U profile 30 x 30 mm, Radius = 1000 mm. see dimensions on p. 6 The capacities are indicated for a manual operation. In case of automatic operation, the capacity must be divided by 2. Check the dimensions and particularly the opening dimension. If this dimension is not correct, adjust the track by narrowing or widening its sides. Jointing two tracks can weaken an installation: it is essential to use jointing brackets (see on p.57) in order to insure perfect assembly, without track disalignement. Welding has to be excluded. Before the use of the doors, it is recommended that the inside of the tracks be correctly cleaned and greased with bodied oil. To avoid any faulty sliding of the door, it is necessary to grease the inside of the tracks at least every 6 months. TRACK 3530 5040 6255 8570 Track stop 1098 1098 2098 2098 2098 1098
RkJQdWJsaXNoZXIy ODAxNzY=