8 Sliding folding system for wooden doors CAPACITY 80 KG TRACK ALUMINIUM (SAF) MOVEMENT SLIDING / FOLDING MANTION® SETS FOR DOORS UP TO 80 KG - OPENING 1.50 M Item Nr. Description SFOLD80-140-1 Set for doors up to 80 Kg, including: - 1 13108 anodised aluminium track. L = 1.4 m drilled every 0.44 m - 1 roller (mounted on ball bearings) - 1 12036Z Plate + 1 track/panel height adjustment gauge - 6 1540 concealed hinges - Fasteners and installation instructions TRACKS 13108/195 Anodised aluminium track, 36 x 27 mm cross-section, drilled every 0.44. Length = 1.95 m 13108/300 Ditto for 3 m long tracks DOOR FRAME KIT SFOLD-F Wooden door frame kit (finger-jointed limewood), predrilled and pre-routed for easy installation and a neat finish. Compatible with openings up to 1500 mm wide and up to 2116 mm high GEARS SFOLD80-1 Set for doors up to 80 Kg, including: - 1 roller (mounted on ball bearings) - 1 12036Z Plate + 1 track/panel height adjustment gauge - 6 1540 concealed hinges - Fasteners and installation instructions Heavy duty version for intensive use of the door (Public places) SFOLD80-2 Set for doors up to 80 Kg, including: - 1 roller (mounted on ball bearings) - 1 12046 reinforced Plate + 1 track/panel height adjustment gauge - 6 reinforced 1575 concealed hinges - Fasteners and instructions OPTIONS 1540 “invisible” flush-mounted hinge. The hinge is concealed inside the panel and is flush with the surface. Advantages: - 3D adjustment: depth (X): ± 2 mm / vertical (Z): ± 2.5 mm / horizontal (Y): ±1 mm - Reversible hinge - Width 23 mm 1575 Ditto for the heavy duty version (for intensive use in public Places): - 3D adjustment: depth (X): ± 2 mm / vertical (Z): ± 2 mm / horizontal (Y): ± 1mm 1575G Drilling template for 1540 and 1575 hinges. Supplied with 4 interchangeable plates to machine different depths. 11216 End stop. 11213 Adjustable end stop. GHEU30L TPE seal, sold by the metre. To be fixed on the vertical frame. Seals against noise and dust. For 4 x 8 mm groove. 63C5/215 Grey adhesive brush seal with short bristles (5 mm) with a pine base. To be fixed on the horizontal beam. For 7 x 3 mm groove. Length = 2.15 m. 66JC5/250 Ø 5 mm silicone tubular seal with a pine base. To be fixed on the edge of one of the 2 doors. For 5 x 3 mm groove. Length = 2.50 m. 66JC5/10 Ditto for length 10 m. GHEU30L 66JC5/.. 63C5/215 1540 1575 1575G 11216 11213 SFOLD-F 13108/... 13108 track SFOLD80-140-1 SET 1540 Hinge Roller Template 12036Z plate SFOLD80-1 GEAR Roller Roller 12036Z plate 12046 plate Template SFOLD80-2 GEAR Template 1540 hinge 1575 hinge corrosion fri cti on durability D 6 C F 2 3 100 000 cycles See details of the standard EN 1527 p.4
RkJQdWJsaXNoZXIy ODAxNzY=