6 SETS Item Nr. Description TANGO40-150 Set for 2 panels including: - 1 aluminium track of 1.50 m (SAF) - 1 SAF roller (ball bearings) with plate - 1 upper pivot - 1 lower pivot - 3 hinges 1504C3 (side fixing) - Screws and mounting instructions 8 TANGO40-195* Set for 4 panels* including: - 1 aluminium track of 1.95 m (SAF) - 2 SAF rollers (ball bearings) with plate - 2 upper pivots - 2 lower pivots - 6 hinges 1504C3 (side fixing) - Screws and mounting instructions 8 *NB: 2 panels on each side of the opening (2 + 2) Sliding-folding system for wooden doors TANGO MANTION® ACCESSORIES 11013 Sliding angle plate for wall fixing 1 angle plate required every 45 cm. 10 1504PI Set of 3 special hinges with ball bearings. The benefits: - Holds the panels in the closed position - Closes the gap bandween the panels This special hinge is an alternative to the hinges 1504C3 (3 hinges are required for 2 panels installations and 6 for 4 panels installations) Use our SLIDSOFT® calculation software 1540 “Invisible” flush-mounted hinge. The hinge is hidden inside the panel and does not protrude from its plane. Advantages: - 3 dimensional adjustment: depth (X): ± 2 mm / vertical (Z): ± 2.5 mm / horizontal (Y): ±1 mm - Reversible hinge - Width of 23 mm GEAR TANGO42 Gear to guide 2 panels. Gear including: - 1 SAF roller (ball bearings) with plate - 1 upper pivot - 1 lower pivot - 3 hinges 1504C3 (side fixing) - Screws and mounting instructions 6 TANGO SET Aluminium track Upper pivot Lower pivot Roller Hinge CAPACITY/PANEL 40 KG TRACK ALUMINIUM (SAF) MOVEMENT SLIDING / FOLDING corrosion fri cti on durability D 6 C F 2 3 100 000 cycles See details of the standard EN 1527 p.4 See accessories on p.54 11013 1504PI 1540 Hinge 1540 space-saving reduce Hinge 1540 3 dimensional adjustments 23 23 22 30 23 z z x x y y 22 7,5 3 m 14±1 23 23 23 22 30 23 z x x y 22 7,5 30 7,5 3 mini RAIL 11108/200 Anodised aluminium track, 33 x 27 mm cross-section, drilled every 0.44 m. Length = 2 m. 6
RkJQdWJsaXNoZXIy ODAxNzY=