4 UALITY - THE STANDARD grade 1 grade 2 grade 3 grade 4 grade 5 24 h* 48 h* 96 h* 240 h* 480 h* *Numbers of hours of resistance to salt spray (Standard EN1670) grade 1 grade 2 grade 3 grade 4 grade 5 grade 6 5 000 c* 10 000 c* 25 000 c* 50 000 c* 75 000 c* 100 000 c* *Number of cycles grade 1 grade 2 grade 3 Door of 50 Kg 50 N* 30 N* 10 N* Door from 51 to 100 Kg 80 N* 50 N* 20 N* Door from 101 to 330 Kg 90 N* 60 N* 30 N* Door over 330 Kg 5 %** 3 %** 2 %** * (10 N): 10 newton correspond to a force of approx. 982 g to start movement of panel **: Percentage of the mass DURABILITY [D] INITIAL FRICTION [F] CORROSION RESISTANCE [C] Mantion certifies* the performance of its fittings for sliding doors and gives you the guaranty of high quality products. The different Mantion products have been designed, produced and tested to be used together. In order to avoid any technical problem or early use of fittings, require MANTION products. ** This guaranty of durability applies to complete sets of Mantion products: tracks, rollers, brackets, stops and guides which are used and installed according to Mantion instructions (capacity and number of cycles) A safety insurance regarding the performance of fittings for sliding doors: Simple and efficient: By requiring the characteristics of a product according to the European standard, you will avoid inconvenience such as bad sliding, blocking or early wearing. What does the extract from the European standard NF EN 1527 indicate? It defines objective quality criteria for a complete set of fittings for sliding doors (tracks, brackets, rollers, stops and guides): - Corrosion resistance (resistance to salt spray) - Initial friction (initial max. force required to open and close the panels) - Durability (number of cycles) It determines the conditions in which the tests have to be made. This allows an easy and real comparison between different competing products: - Door under 200 kg: Height: 2 m. & stroke: 0.80 m. ou Height: 2 m. & stroke: 2 m.* - Door over 200 kg: Height: 2 m. & stroke: 2 m. * all our tests for doors weighing less than 120 kg were carried out on a portal frame: Height: 2 m. & stroke 0.80 m. It indicates the performance of fittings according to the tests results: Authorised by SGS ICS 29, avenue Aristide Briand 94111 Arcueil Cedex France t +33 (0)1 41 24 87 75 f +33 (0)1 73 01 71 29 www.sgs.com Page 1 of 1 This document is issued by the Company subject to its General Conditions of Certification Services accessible at http://www.sgs.com/en/Terms-and-Conditions. Attention is drawn to the limitations of liability, indemnification and jurisdictional issues established therein. The authenticity of this document may be verified at http://www.sgs.com/clients/certified_clients.htm. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Certificate FR15/81841903 The management system of MANTION SAS 7 rue Gay Lussac 25000 Besançon France has been assessed and certified as meeting the requirements of ISO 9001 : 2015 For the following activities Concept, production and sales of armatures for sliding doors and air transportation systems. This certificate is valid from 1 September 2021 until 26 August 2024 and remains valid subject to satisfactory surveillance audits. Issue 3. Authorised by SGS ICS 29, avenue Aristide Briand 94111 Arcueil Cedex France t +33 (0)1 41 24 87 75 f +33 (0)1 73 01 71 29 www.sgs.com Page 1 of 1 This document is issued by the Company subject to its General Conditions of Certification Services accessible at http://www.sgs.com/en/Terms-and-Conditions. Attention is drawn to the limitations of liability, indemnification and jurisdictional issues established therein. The authenticity of this document may be verified at http://www.sgs.com/clients/certified_clients.htm. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Certificate FR15/81841904 The management system of MANTION SAS 7 rue Gay Lussac 25000 Besançon, L'Aumône France has been assessed and certified as meeting the requirements of ISO 14001 : 2015 For the following activities Concept, production and sales of armatures for sliding doors and air transportation systems. This certificate is valid from 1 September 2021 until 26/08/2024 and remains valid subject to satisfactory surveillance audits. Issue 3 corrosion fri cti on durability D 6 C F 2 3 100 000 cycles Measured without the use of softcloser or hydraulic closer stop ** This guarantee applies within the limit of a number of cycles specific to each range and the conditions of installation and use available on: WWW.MANTION.COM **
RkJQdWJsaXNoZXIy ODAxNzY=