Our hinges

• Adjustable hinge - Side fixing 50 x 200 mm, axle Ø 8

• Hinge, welding type Height : 80 mm - Ø 10 mm axle

• Hinge, welding type Height : 85 mm - Ø 12 mm axle

• Hinge, welding type Height : 120 mm - Ø 14 mm axle

• Welding hinge, Height : 120, axle Ø 16

• Hinge in 25/10e, screwing type, wall fixing - 50 x 200 mm - axle Ø 10 mm.

Hinge in 12/10e, wall fixing - 70 x 40 mm - axle Ø 4 mm

Bisagra oculta "invisible". La bisagra está oculta dentro del panel y no sobresale de su plano. Versión reforzada (para uso intensivo del consumidor).

Ventajas :

• Ajuste tridimensional: profundidad (X): +/- 1 mm / vertical (Z) / +/- 2 mm / horizontal (Y): +/- 1 mm;
• Bisagra reversible;
• Ancho de 23 mm.

• Hinge 120 x 100, with a Ø 14 axle, top-fixing

• Hinge 120 x 100, with a Ø 16 axle, top-fixing

• Hinge in 18/10e, screwing type, soffit fixing - 80 x 60 mm - axle Ø 10 mm.

• Screwing hinge 85 x 85, with a Ø 12 axle, top-fixing, for woods of 35 mm thick

• Side-fixing hinge 85 x 60 mm, riveting or screwing type

Stainless steel hinge (XA2), centred, fastened on edge. Pin Ø = 10 mm.

Stainless steel hinge (XA2), offset, fastened on edge (with handle). Pin Ø = 10 mm.

Stainless steel hinge (XA2), offset, fastened on edge. Pin Ø = 10 mm.

• Top-fixing hinge 120 x 100 mm, spindle Ø 16 mm

• Adjustable hinge - Side fixing 50 x 65 mm, axle Ø 8

• Top-fixing hinge 85 x 85 mm, spindle Ø 12 mm

• Hinge in 20/10e, wall fixing - 50 x 65 mm - axle Ø 8 mm

• Hinge in 18/10e, wall fixing - 80 x 60 mm - axle Ø 10 mm.

Plantilla de fresado para las bisagras 1540 y 1575.

Se suministra con 4 placas intercambiables para mecanizar diferentes profundidades.

Set of 3 stainless steel hinges (XA2), centred, fastened on edge. Pin Ø = 10 mm.

Set of 3 stainless steel hinges (XA2), offset, fastened on edge. Pin Ø = 10 mm.

Set of 3 stainless steel hinges (XA2), offset, fastened on edge (with handle). Pin Ø = 10 mm.

Set of 3 special hinges with ball bearings. 

Advantages:

• Holds panels in closed position;
• Eliminates play between panels (fastened to the back of the panels).

This special hinge is designed to replace the hinges in kit 1504C3 (3 for 2 panels and 6 for 4 panels).
The calculation formulas are different: use our SLIDSOFT® calculation software.

Adjustable polished stainless steel hinge, 2 mm. Dimensions: 65 X 62 mm. Stainless steel pin, 8 mm in diameter. Face-mounted. 

Adjustable galvanized steel hinge, 2 mm. Dimensions: 40 X (47 + 30) mm. Steel pin, 6 mm in diameter. Face-mounted. 

Adjustable galvanized steel hinge, 3 mm. Dimensions: 120 X 100 mm. Steel pin, 14 mm in diameter. Face-mounted.