Suchergebnisse: „“ – Seite 1

Tore - Klappsystem

Ergebnisse pro Seite

- - -

Verstellbare Drehzapfen z. Anschrauben
Steel pivot with the top part mounted on ball bearings and the lower part on tapered roller bearings to bear the weight of the gate.
The pivot is mounted on a screw-in bracket to make it easier to install.
The top part of the pivot is equipped with 2 screws to adjust the vertical alignment of the gate.
Covering a wide range of weights – view the chart in Mantion’s catalogue 411.

Siehe das Angebot
Eingebauter Torschliesser
Tragkraft/Tür: 200 kg

Siehe das Angebot
Drehflügeltore – Drehzapfen mit Befestigungseisen für Tore bis 80 kg
Pivot with upper and lower heads to be inserted in a square-shaped tube. Both heads are equipped with a lubricator. The lower head is mounted on a ball bearing to reduce the stress of the gate’s rotational force. Pivot equipped with screw-in or cast-in-place fastening plates. A covering can be added to the upper part […]

Siehe das Angebot
Verstellbare Drehzapfen z. Anschweissen
Steel pivot with the top part mounted on ball bearings and the lower part on tapered roller bearings to bear the weight of the gate. Weld-on pivot. The top part of the pivot is equipped with 2 screws to adjust the vertical alignment of the gate. Covering a wide range of weights – view the […]

Siehe das Angebot
Drehflügeltore – Scharniere z. Anschrauben mit Kappe z. Anschrauben
Steel hinge with a screw-in or weld-on raw steel clevis. The galvanized hinge rod is screwed in through a steel, or other, upright. Versatile range, for gates weighing up to 200 kg.

Siehe das Angebot
Drehflügeltore – Scharniere z. Anschrauben mit Kappe z. Anschrauben
Steel hinge with a weld-on raw steel clevis. The galvanized hinge rod is screwed in through a steel, or other, upright. Versatile range, for gates weighing up to 200 kg.

Siehe das Angebot
Drehflügeltore – Scharniere z. Anschweissen mit Kappe z. Anschrauben
Steel hinge with a screw-in or weld-on raw steel clevis. The galvanized hinge rod is mounted on a weld-on plate. The vertical alignment weld gate is adjusted dynamically, without removing the hinge pin. Versatile range, for gates weighing up to 150 kg.

Siehe das Angebot
Drehflügeltore – Drehzapfen, drehbar 180 °. Z. Anschweissen
Steel hinge with a raw steel weld-on clevis. The galvanized hinge rod is mounted on a weld-on raw steel plate. This hinge allows the gate to be opened to 180 degrees. The vertical alignment of the gate is adjusted dynamically, without removing the hinge pin. Versatile range, for gates weighing up to 100 kg.

Siehe das Angebot
Drehflügeltore – Scharniere auf Anschraubplatte
Steel hinges with a raw steel screw-in or weld-on clevis. The galvanized hinge rod is mounted on a screw-in plate. The vertical alignment of the gate is adjusted dynamically, without removing the hinge pin. Versatile range, for gates weighing up to 150 kg.

Siehe das Angebot
Drehflügeltore – Scharniere z. Einbetonieren mit Kappe z. Anschrauben
Steel hinge with a raw steel screw-in or weld-on clevis. The galvanized hinge rod is equipped with a cast-in-place insert. Versatile range, for gates weighing up to 100 kg.

Siehe das Angebot