SYCOMM SOLAR - Solar motorisation for sliding shutters

SYCOMM SOLAR - Solar motorisation for sliding shutters

 Solar motorisation for sliding shutters for the range Win-Slide 2.

Capacity total: 200 kg
Panel thickness: 25 - 80 mm 

 

Simple, reliable and quick to install!

  • No need to connect to the mains supply
  • Plug & Play : connect components using simple connectors (motor / solar panel / battery)
  • Self Sufficient: Up to 30 days of autonomy without external power
  • Can be integrated with standard home automation systems
  • Capacity of 1 to 4 panels with total weight of 200kgs max
  • Integrated brushless technology

Designed and Manufactured by Mantion!

Sycomm® Solar motorization
Supply voltage: 12V DC
Max power: 25 W
Dimensions (L x W x H): 150 x 50 x 73 mm
Degree of protection: IP55
Type of limit switch: Dynamique (stop on obstacle)
Motor technology: Brushless
Linear speed: 60mm/s
Operating temperature: -20 à +60°C
Radio frequency: 433.92 MHz
Motor cable length: 30 cm (optional 3m extension)

General data:
Soft start and stop - Obstacle detection

Complies with CE requirements as per:
EN60335-1:2013 ; EN60335-2-103:2004+A11:2009 ; NFP26341
EN61000-6-1:2007 ; EN61000-6-2:2006 ; EN61000-6-3:2007 ; EN61000-6-
4:2007 ; NF 26-341

Complies with European directives:
2006/95/CE ; 2006/42/CE ; 2004/108/CE ; 1999/5/CE ; 2002/95/CE

NB: The values in the tables are given for information only, they depend on specific conditions and do not constitute a firm commitment on the part of Mantion. Motor designed for domestic use and installation under a fascia panel.

* Fabrication* Motor guarantee
SYCOMM SOLAR – Solar motorisation for sliding shutters - Image 1 SYCOMM SOLAR – Solar motorisation for sliding shutters - Image 2 SYCOMM SOLAR – Solar motorisation for sliding shutters - Image 3 SYCOMM SOLAR – Solar motorisation for sliding shutters - Image 4

Choose your Accessories

5 product(s)

Choose your Pelmets and end caps

6 product(s)

Choose your Motor controls

2 product(s)

Choose your KIT motorization

9 product(s)

Choose your Hangers

1 product(s)

Choose your Hangers and Accessories

3 product(s)
  • Mounting Win-Slide 2

    Mounting Win-Slide 2

    Ref: 11280LXA2

    Mounting with 4 rollers, ball-bearing axles, M8
    A2 stainless steel screws (93 mm).
    80 kg max. / panel.

  • Plate

    Plate

    Ref: 0026XA2

    A2 stainless steel plate to be screwed on edge. Panel thickness: 25 mm min.

  • Track stop

    Track stop

    Ref: 11286XA2

    Track stop with two anchoring points. Supplied with A2 stainless steel fasteners.

Choose your Tracks and Accessories

4 product(s)

Choose your Supports

1 product(s)

Choose your Products

1 product(s)
  • Battery cover housing

    Battery cover housing

    Ref: C0014430

    Re-cuttable battery cover housing electrogalvanised steel (to be painted). Fits under the lintel using the battery pack supports.
    Length = 1250 mm.

Are you sure you want to remove this item from your basket?