SAF-TWIN | Mantion

Capacity/door : 80 kg
Track : Aluminium
Movement : Straight

A double straight sliding system for cupboards with 2 or 3 door panels weighing up to 80 kg each and with a maximum thickness of :

- 35 mm for track 11108D35

- 45 mm for track 11108D45

SILENT : The result of many hours of design and testing, our new rollers ensure doors slide softer than ever.
INGENIOUS : Rollers equipped with a ball joint that improves the robustness of the system and adjusts to any mounting location defects.
PRACTICAL : Quick and easy to install thanks to the double track.

* Number of cycles

* Fabrication

25 years guarantee

EPD

SAF-TWIN - Image 1

SAF-TWIN - Image 2

SAF-TWIN - Image 3

SAF-TWIN - Image 4

SAF-TWIN - Image 1

SAF-TWIN - Image 2

SAF-TWIN - Image 3

SAF-TWIN - Image 4

Plate

Ref: 11036

Plate for side-mounted doors. L = 127 mm. Can be installed flush to obtain the smallest gap between the track and door (min. gap of 11 mm required).

View product

Softcloser for gentle closing of doors 21-60 kg

Ref: M66S

Softcloser for gentle closing of doors (100 mm).
Softcloser automatically follows door to its closed position.
Suitable for doors weighing 21 - 60 kg.
It is recommended that 2 softclosers be used for doors with a width of 830 mm or more.

View product
Damper closer

Ref: M67S

Buffer damper system for softly opening and/or closing doors (over 100 mm).
The damper automatically accompanies the door to its open and/or closed position. Suitable for doors weighing 61-80 kg. It is recommended that 2 dampers be used for doors with a width of 870 mm or more.

View product

Gear for 1 panel

Ref: SAF80A-7
Gear for one panel, includes :
- 2 rollers SAF81A (stainless steel pins mounted on ball bearings),
- 2 plates 10036,
- 2 stops 11213,
- 1 lower guide 1124,
- Tools and installation instructions
View product

Guide

Ref: 1103R
- Polyamide guide - Screwing type for channel of 6x18 mm
View product

Aluminium double track – L : 1.981 m

Ref: 11108D35/P78

Raw aluminium double track, 33 x 27 mm cross-section, drilled every 0.44 m. Gap between the two tracks = 44.5 mm. Length = 1.981 m.

View product
Aluminium double track – L : 2.997 m

Ref: 11108D35/118

Raw aluminium double track, 33 x 27 mm cross-section, drilled every 0.44 m. Gap between the two tracks = 44.5 mm. Length = 2.997 m.

View product
Aluminium double track – L : 1.981 m

Ref: 11108D45/P78

Raw aluminium double track, 33 x 27 mm cross-section, drilled every 0.44 m. Gap between the two tracks = 54 mm. Length = 1.981 m.

View product
Aluminium double track – L : 2.997 m

Ref: 11108D45/118

Raw aluminium double track, 33 x 27 mm cross-section, drilled every 0.44 m. Gap between the two tracks = 54 mm. Length = 2.997 m.

View product