TANGO - Sliding-Folding system TANGO for partition doors and wardrobe doors

Sliding-Folding system TANGO for partition doors and wardrobe doors.

Capacity/Pannel: 40 kg
Track: Aluminium (SAF)
Movement: Folding/Sliding
Thickness / Panel : 16 - 40 mm

Simple, reliable and quick to install!

Folding sliding system for 2 or 4 panels (2 on each side of the opening).
Suitable for wardrobe doors and partition doors.

- DESIGN:
no bottom track and minimum gaps
- PRACTICAL:
For 2 panels each 750 mm maximum width
- POLYVALENT :
for partition doors and wardrobe doors, 2 or 2+2 panels

TANGO – Sliding-Folding system TANGO for partition doors and wardrobe doors - Image 1

TANGO – Sliding-Folding system TANGO for partition doors and wardrobe doors - Image 2

TANGO – Sliding-Folding system TANGO for partition doors and wardrobe doors - Image 3

TANGO – Sliding-Folding system TANGO for partition doors and wardrobe doors - Image 4

Set – Track 1.20 m

Réf : TANGO40-120

Set for 2 panels including : 1 aluminium track of 1.20 m (SAF), 1 SAF hanger (ball bearings) with plate, 1 upper pivot, 1 lower pivot, 3 hinges 1504C3, screws and mounting instructions.

Ver el producto
Set – Track 1.50 m

Réf : TANGO40-150
Set for 2 panels including:
- 1 aluminium track of 1.50 m (SAF);
- 1 SAF hanger (ball bearings) with plate;
- 1 upper pivot;
- 1 lower pivot;
- 3 hinges 1504C3;
- Screws and mounting instructions.
Ver el producto
Set – Track 2 m

Réf : TANGO40-200

Set for 4 panels including :
- 1 aluminium track of 2 m (SAF)
- 2 SAF hangers (ball bearings) with plate
- 2 upper pivots
- 2 lower pivots
- 6 hinges 1504C3
- Screws and mounting instructions.

Ver el producto
Set – Track 3 m

Réf : TANGO40-300

Set for 4 panels including :
- 1 aluminium track of 3 m (SAF)
- 2 SAF hangers (ball bearings) with plate
- 2 upper pivots
- 2 lower pivots
- 6 hinges 1504C3
- Screws and mounting instructions.

Ver el producto
Set – 1.95 m track

Réf : TANGO40-195
Set for 4 panels, includes:
- 1 x 1.95 m anodised aluminium track (SAF);
- 2 SAF hangers (smooth pin with ball bearings) with plate;
- 2 upper pivots;
- 2 lower pivots;
- 6 hinges 1504C3;
- screws, spanner and installation instructions.
Ver el producto
Set TANGO for 2 panels – Track 1,50 m

Réf : TANGO40A-150

Set for 2 panels including:
- 1 anodised aluminium track SAF drilled - L = 1.50 m;
- 1 SAF roller (ball bearings) with plate;
- 1 upper pivot;
- 1 lower pivot;
- 3 hinges 1504C3 (side fixing);
- Screws and mounting instructions.

Ver el producto
Set TANGO for 4 panels – Track 1,95 m

Réf : TANGO40A-195

Set for 4 panels including:
- 1 anodised aluminium track SAF drilled - L = 1.50 m;
- 2 SAF rollers (ball bearings) with plate;
- 2 upper pivots;
- 2 lower pivots;
- 6 hinges 1504C3 (side fixing);
- Screws and mounting instructions;
2 panels on each side of the opening (2 + 2).

Ver el producto

Carril de aluminio – 1.95 m

Réf : 13108/195

Carril de aluminio anodizado SAF, sección 36 x 27 mm, perforado cada 0,44 m. Longitud 1.95 m.

Ver el producto
Carril de aluminio – 3 m

Réf : 13108/300

Carril de aluminio anodizado, SAF, sección 36 x 27 mm, perforado cada 0,44 m. Longitud 3 m.

Ver el producto
Bracket

Réf : 13013

Angle bracket (sliding) for fastening tracks 13312 and 13108 to the wall. Fastened every 0.44 m.

Ver el producto

Gear

Réf : TANGO42

Gear to guide 2 panels. Suitable for TANGO40-120 and TANGO40-150 to add 2 panels on a 4 panels installation (2+2).

Ver el producto
Gear

Réf : TANGO42A

Gear to guide 2 panels including:
- 1 SAF roller (ball bearings) with plate;
- 1 upper pivot;
- 1 lower pivot;
- 3 hinges 1504C3 (side fixing);
- Screws and mounting instructions.

Ver el producto

Hinge

Réf : 1504PI

Set of 3 special hinges with ball bearings.

Advantages:

Holds panels in closed position;

Eliminates play between panels (fastened to the back of the panels).
This special hinge is designed to replace the hinges in kit 1504C3 (3 for 2 panels and 6 for 4 panels).
The calculation formulas are different: use our SLIDSOFT® calculation software.

Ver el producto
Bisagra oculta

Réf : 1540
Bisagra oculta "invisible". La bisagra está oculta dentro del panel y no sobresale de su plano.

Ventajas :
- Ajuste tridimensional: profundidad (X): +/- 2 mm / vertical (Z) / +/- 2,5 mm / horizontal (Y): +/- 1 mm ;
- Bisagra reversible;
- Ancho de 23 mm.
Ver el producto

Angle plate

Réf : 11013
- Angled (sliding) bracket for wall mounting of tracks 11108 and 11312. Fastened every 0.44 m (Track 11108) and fastened every 0.30 m (Track 11312).
Ver el producto